Your cart is empty.
Your cart is empty. 3/8 inch NPT Air Filter, Regulator & Lubricator Combo
The Filter, Regulator＆Lubricator is three part system. The filter is designed to remove most liquid and solid particles from the air supply. The Self-Relieving Pressure Regulator is used to adjust the outlet pressure. The lubricator provide oil to the air tool and increase the life of the tool.
Installation and Operating
1. Preparation
The assembly of all calibration shall meet the maximum flow requirement.
Please clean the port and fitting before installation, it will effectively avoid bring dust to the air path.
Pay attention to direction of air flow and arrow pointing on product body if correct, minding port and thread size if match.
2. Pressure Adjustment
Pull up the knob of pressure gauge, rotate:
If you do clockwise rotation, pressure will rise steadily.Pressure will down when you rotate counterclockwise.
Stop turning after reaching the required index and lock down the knob,forget this step you may face leakage problem.
3. Dial Reading
Make sure that the pressure gauge is tightly installed on the main body, and pay attention to whether the reading rises and falls smoothly while adjusting pressure.
Package Includes:
1 x Semi-Auto Drain & Polycarbonate Bowl with Metal Guard
1 x 0-150 PSI Gauge & Bracket
1 x pair of Air Coupler＆ Plug Kit
2 x 3/8 inch × 3/8 inch male brass equal hex nipples
1 x 3/8 inch Mini Ball Valve
2 x PC-3/8-3/8 inch NPT Male Connect Fitting
2 x PC6-01 threaded joints
1 x Thread Seal Tape
