Shopping Cart

Your cart is empty.

Your cart is empty.

Geekpure 20-Inch Whole House Water Filter Housing-Fit 4.5' x 20' Filters-3/4 Port-Pack of 4

Free shipping on orders over $29.99

$199.00

$ 90 .99 $90.99

In Stock

About this item

  • 20 Inch Clear housing,3/4"NPT plastic inlet/outlet,with plastic wrench,screws and metal bracket.Pack of 4 sets housings in the box
  • Clear housing allows you to see when you need to change filters and everything else works as it should.Flow rate : 10-15 GPM (Depend on Feed Water Pressure)
  • HIGH QUALITY-Fits standard sized 4-1/2 inch diameter industry 20 inch whole house cartridges.Large capacity housing for high flow applications
  • It is Installed at the main water supply and produce pure water for your entire home. Enjoy better water from every tap and every appliance in the whole house.1 year limited warranty
  • ISO9001:2015 certificated Manufacturer ,30 Days Money Back Guarantee.NOTE:THE MATERIAL OF CLEAR HOUSING IS NOT STRONG AS BLUE COLOR HOUSING,SUGGESTED WORK PRESSURE IS UNDER 50 PSI


Specification:
Maximum Pressure: 90 psi (6.2 bar)
Temperature:40-110°F/5-45°C
Shelf life: 5 Years
More valuable information:
✪What is dimension of the housing?
It is 4.5"OD x 20" height .
✪What is in the box?
4 x 20 inch clear housing with pressure release and 3/4 inch NPT , 4 x plastic wrench , x metal bracket.
✪What is filters options?
1.PP spun filter, reduce sand, dirt, sediment. life time:6 months.ASIN:B07JM78FXT。
2.Carbon block filter, Further reduce chlorine, taste & odors, life time:6 months. ASIN:B07798RFVH or B07JNL4QFS.
3.PP pleated filter, the material is same as PP sediment,reduce sand, dirt, sediment. life time:6 months. ASIN:B07TNJ86KZ and B07TPLK752.
PS.The Life Time of the Filter Cartridge Depends on Usage Amount and Feed Water Quality.
Note:
1. Protect filter housing from freezing.
2. This filter housing has a maximum test pressure rating of 90 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator MUST BE INSTALLED before the filter housing. this action will guard against the water pressure exceeding the maximum pressure rating.it is recommended that the pressure regulator be set at 50 psi or less.
3.The rubber o-ring provides the water tight seal between the cap and the sump. it is important that the o-ring be properly SEATED IN THE GROOVE of a water leak could occur.


Recommended Products