Your cart is empty.
Your cart is empty.Product Description
KOHLER GENUINE PART GP1037022-CP POP-UP STOPPER WITH METAL STEM
From the Manufacturer
Kohler Genuine Part, Drain Stopper, Metal stem.
Customer
2025-08-02 11:02:35
Like some others have posted, I got the wrong size. It is difficult to find the right size for my Kohler sink. Instead of looking into it further, I just used a metal file to file down the stem and it works great.
Todd Hutcheon
2025-07-29 16:56:34
Exact fit for missing drain stopper
ilona sala
2025-07-27 17:00:40
I needed 3 of these for replacing tarnished ones. Not all are the same size, however. After they didn't fit, I had to call kohler and send pictures. Much more expensive than these and apparently only coated chrome. We'll see when they come and hope they fit tho as the new ordered ones are the only ones that will fit a sink installed in 2006.
TiffanyVZ
2025-07-22 13:27:23
According to the Kohler website, this is the product needed for the Coralais center set bathroom faucet. However, both the fins and the round stopper are too large for the drain opening. The product itself seems to be fine quality, but it does not correspond with the products suggested, so I would do more research to verify the size and product needed before ordering this for your sink!
Airdog99
2025-07-12 15:02:54
Like many people, I purchased this part to replace the broken nylon threaded eyebolt in my old drain plunger. This part is chrome and is half the price of the brushed nickle part. The good news is that the top easily unscrews and comes apart to swap my original brushed nickle part to this one.UPDATE: I later found out that you don't have to purchase the complete stopper as the threaded eyebolt is available as a replacement part. Kohler does not make this part easy to find. Even my local Kohler Design Center had no clue how to order it or that it was even a replaceable part. It also isn't available at any of the hardware stores including Lowe's or Home Depot.So if you want to save a few more dollars and you don't need the entire stopper you can order the Kohler 1025648 - EYEBOLT, DRAIN PLUNGER for less than $1.50
Griffin Klema
2025-07-08 11:01:50
Why Kohler has ten (ten!) different stoppers and three different drain assemblies for a single faucet (Fairfax R12181-D) I will never know. I'm not talking about finishes either, it's ten different shapes/design/styles of stopper.With absolutely no indication on the drain assembly's throat opening (only the outer diameter of the drain flange), one is left to guess what stopper will fit. This one didn't for my drain. Shame on Kohler for ill-written specifications and too many drain designs.Ultimately, I made this one fit my drain by shaving off about 1/16" of material from the edge of each of the three fins. The base metal beneath the chrome is brass, so plus one for material selection. The polished chrome finish on the top with etched Kohler brand is well executed, and hopefully holds up well for many years.
Michael C. Welch
2025-06-18 10:58:38
Good quality ,however too large for my Kohler drain.
Guy Zoghby
2025-06-17 13:40:37
The old stopper broke at the very bottom of the threaded shaft after seven years of daily usage. I removed it to determine the part number and left it open for one day. Sure enough, my wife lost an heirloom earring down the drain!I looked up my sink model on the Kohler website at www.Kohler.com/ServiceParts. Search for Bathroom > Bathroom Faucets > Sink Faucets. This helped but there were NINE stoppers used in my model! So, I measured the size of my old part, then I compared it the new available parts on the the Kohler site.The part I received from Amazon was exactly as described and works perfectly. It is a Kohler brand part.Tips:Measure the diameter of your old stopper and match that to the replacement.Note your finish (such as chrome polished) and be sure to choose a match.Expect to adjust the length of both the threaded shaft at the bottom as well as the height of the stopper head at the top.Apply threadlocker to the lock ring that secures the stopper linkage to the drain.P.S. I retrieved the lost earring from the P-trap. Happy Wife!
Brian Chamberlain
2025-06-07 14:53:57
This bathroom sink stopper is of excellent quality, and easy to install!
Shady Stasi
2025-04-24 16:49:14
The metal stem is much more durable and easier to clear with CLR.
WY
2025-03-28 09:58:30
I received a product that was clearly re-packaged (badly) so that the transparent plastic protrudes past the bottom of the cardboard backing. I originally thought that the "stem" was the screw-on piece at the bottom, and so I was quite annoyed by the fact that it was plastic when I ordered the metal stem, and I thought they had tried to re-package a cheaper product. However, looking at the details closer, it seems that the "stem" is the middle piece, and it is indeed metal. I assume there is no version of the product where the bottom piece is metal; that's annoying given that my last one snapped in two places. It will always be the weak link. Despite the poor re-packaging, the product is otherwise in great condition. I tried mildly flexing the plastic piece to ensure it wasn't already cracked, and it seemed to be good. The chrome on the stopper was also clean and unblemished.
Roy McIlveen
2025-03-07 09:26:10
Kohler stopper was exactly as described and fit perfectly. Delivery was rapid and on the date promised.
ronny orellana
2025-01-22 09:40:32
Remplacement de l'original
Recommended Products
$13.49
$ 5 .99 $5.99