Your cart is empty.
Your cart is empty.Product Description
Question & Answer
- Q1:Doesn’t it display normally after connecting to the camera?
After the K1 camera is installed, the machine's firmware needs to be updated to version 1.3 before it can be used normally.
- Q2: The machine firmware has been updated to the latest version, but the camera still does not display?
Measure the voltage of the camera wiring port first, and check whether there is any problem with the camera connecting cable.
- Q3：After normal installation, is there a common situation where delayed photography cannot be used normally?
Check the machine's memory. Full memory will affect normal storage and use; check the network status. The machine's upload to the background is related to the network status.
C & L
2025-08-19 17:54:08
This is just the best little camera. Only downside is that it should have been included with the printer to start with but since it is not, getting it is a no brainer. There are not settings that need to be changed and all the hardware is already in place for you just to plug it in and start using it. The quality is MUCH, MUCH, MUCH better than the ones found on the P1 series from that other company. Video is smooth and you are more than able to check the progress of your prints. It also creates very good time lapses. I am not too sold on the AI features as I don't think they are there yet, but I didn't buy it for that reason. Even without the AI, just the basic option to monitor your prints makes it worth it. Do yourself a favor and get it if you haven't yet.
Bryan
2025-08-10 15:50:54
Just snap it on and plug it in. Just works. Didn't have to do anything extra. No issues at all.
lunchbox
2025-08-08 14:56:42
if your looking into getting one yeah itll work and do the job with pla but with abs and 55-60c chamber temps the camera cuts out but that a known issue and not really with the camera it self i got this to add to my k1
Carol Chapman
2025-08-06 17:30:41
The one who received the camera said it workee great.
Kyleservicetech
2025-07-14 11:07:32
Went to youtube, tried everything, can't get it to work on my cellphone or PC
Hammerfest
2025-07-04 13:11:44
WARNING:If you are planning to change out the stock lighting on the K1/Max the NEW module version used does not respond to any of the camera control commands, you cannot adjust exposure, auto focus, or ANY setting so even after adding lights it still looks darker then it should!!!I had purchased this unit in the hope of replacing the one my newest came with but the module in all Amazon listings is the new one already!!!A ticket has been opened with Creality to return the ability to control the camera module.Keep in mind, the more people that open a ticket regarding this, the more likely they will issue an update to remedy this, so if you have this new module and want control back, please join me in making a ticket with Creality.
DenverPilot
2025-06-24 17:56:20
Works fine to keep an eye on things. Poor quality and focal distance is wrong in a K1. Better suited for the larger K1 Max. Unimpressive but easy plug in and cheap.
Bre+Corey
2025-06-08 14:52:49
Would not connect. Super cheap. Couldn't even get a replacement. I use a Wyze Cam now.
Brunner Michael
2025-06-01 10:10:42
Leichter Einbau in den K1
Fredrik
2025-05-24 17:45:51
Fungerar kanon!
stephaneB
2025-05-13 12:34:56
Rien a dire, se monte facilement dans la K1 et fonctionne parfaitement. A conseiller si votre machine est au sous sol. Avec le smartphone, on peut voir ce qu'il sevpasse sans bouger de son canapé.
RICKY
2025-04-17 13:59:07
va como tiene que ser , de lujo
Leo
2025-02-09 17:01:09
Signori che dire, una opzione essenziale per vedere la stampa e non soffrire di ansia. volendo è possibile annullare la stampa in caso di problemi, da remoto!!!! ovviamente molto utile se usata insieme alla applicazione mobile
Recommended Products
$669.99
$ 99 .00 $99.00