Your cart is empty.
Your cart is empty.
Our kiln-dried ebony fingerboard has flat undersides, is unfretted (no inlays), and is ready for trimming to fit a variety of neck widths.
This slotted fingerboard for Gibson Guitar features:
- 24.562" scale
- 12" radius
- 24 fret slots
Note: Gibson® guitar scale is commonly referred to as 24-3/4" but is actually 24.562".
This is the most common of three different scales described as 24-3/4" by Gibson over the years. Many Gibson's have alternate scale lengths—please measure your guitar before ordering!
Tip: For 20-fret necks, simply cut off the four highest slots.
Fingerboard specs:
- Approximate dimensions: 2-3/8" x 18-1/2" x 15/64" (60.32mm x 469.90mm x 5.95mm)
- Radius: 12" (304.80mm)
- Fret slots: 24 slots, 0.023" wide (0.58mm)
- Scale: 24.562" (623.87mm)
IMPORTANT: Ebony is usually not uniformly black. We recommend using black fingerboard stain, as used by Gibson®, Paul Reed Smith® and other makers for darkening the streaks on ebony fingerboards, bridges and peghead overlays.
