Your cart is empty.
Your cart is empty.Need light
2025-09-03 15:18:22
Did the job
Dylan
2025-08-06 14:14:21
These worked for me, mind you if this is something you use a lot and in different sizes maybe it'd make more sense to look for like a kit or something with a variety of different ones, as $8 bucks for just these few little springs aint really much of a deal or anything, that said it's also not totally out of line if you just have a one time use case. These ultimately did work for me in fixing the lid of my bathroom trashcan which is all I needed them for, that said if you have a similar use case pay special attention to the 0.5mm wire diameter as that is VERY thin and these really aren't to small by themselves, ultimately to get them to work for me I had to double them up which was not ideal, but that was more on me for not measuring the precise size of spring that I need, so I would just say double check your spring size, and if these are a match for you then go for it. If length isn't precise that's not a big deal you can just trim them down.
Roadking
2025-07-20 14:35:33
I got these springs because they were advertised as having a 0.5 mm diameter, which is the size I need to clean and adjust my windshield washer nozzles. They work pretty well for this purpose, although they don't measure 0.5 mm with my digital calipers. They measure 0.45 mm, close, but I wish they were actually a little larger. I did not use them as springs, their intended use, so I won't comment on that.
Jamatt
2025-07-12 18:31:58
I ordered these torsion springs to repair an old boom box that I have owned for a long time. The CD player lid broke and some springs were lost. I was able to use two of these springs and trim the tag ends to fit my application. These springs are high quality.
Bill Turner
2025-06-28 18:16:27
These springs are not suitable for the purpose I had intended to use them. They are very weak and have very little torsional strength despite what the advert says. I can't imagine how they might be used in "automobiles, electrical appliances, machinery, instruments, electronics, communications, textiles, medical, furniture, handicrafts and other fields" as advertised.
J. D. Mason
2025-06-13 11:40:30
These small springs are used in all kinds of toys and other assorted products. I used them to repair an old metal cap gun I got from my father. I don't know what more I can say about them other than that they are exactly as pictured and described. They are packaged in a small (4 cm) square ziplock. The price is about what I would expect to pay so I think they are a pretty good value.
rkruz
2025-05-31 10:48:05
I obtained the Stainless Steel Springs for a robotics project, but I changed the design, eliminating the need for the springs.Upon inspection, the springs are well made with a long tang, making them easy to adapt, bend, and such.They are small and provide a reasonable force for their size.
Orion Winder
2025-05-29 12:55:44
I got these to use with my mechanical (mostly metal, but also Lego/clones) building sets, as there's many times you need a small spring for actuators, returns, switches, etc in various models one makes. The size I got I was hoping to use with Meccano axles (4mm rods) by opening them up abit by "unspringing" them slightly. These were too tight and small for actual use on my Meccano or Erector set rods, but worked perfectly for my Merkur axles and also Lego "wand" sized rods. (The 5mm dia size would be good I'm sure for Meccano, Eitech, Erector, Marklin, etc axles that are all about 4mm sized).The finish is great and the parts are perfect for what I am using them for, I just need to get a better assortment and buy them in the larger size. I wish they had a nice assortment of higher volume of parts; at a LOWER price of course as for just buying the 10 seems abit pricey per unit.Great for what I'm using them for though, and it's super that being SS I don't have to worry about them rusting my old metal sets (as most of my other "assorted" springs are older black or steel types, that tended to rust over the years, imparting rust to my construction bits also.)
Rezensent
2025-04-12 10:15:23
Diese Federn haben die Maße wie angegeben. Sie sind leicht magnetisch, sehen optisch aber schon nach Edelstahl aus.Sie federn relativ weich, man braucht nicht viel Kraft um sie zusammenzudrücken. Ideal für 3D-Gedruckte Teile, so werde ich sie jedenfalls einsetzen.Alles entspricht der Beschreibung, ich habe nichts auszusetzen, daher 5 Sterne von mir.
FGen
2025-03-01 18:37:16
OK
fabio
2025-02-12 16:22:58
Funzionale per le applicazioni che necessitano una molla che restituisce una risposta non molto forte. D'altronde la sezione del filo d'acciaio è molto ridotta e non potrebbe che essere cosìPer una maggiore resistenza/pressione occorre cercare un altro prodotto
Muy rápido y bien empaquetado muy satisfecho.
2025-02-10 17:30:33
Todo espectacular... El producto, el embalaje.. pero si de algo hay que destacar, es la gestión eficaz en mis pedidos.. recomiendo 100%
Alvina
2024-12-30 16:51:57
Good springs. Work as intended.
Recommended Products