Your cart is empty.
Your cart is empty.Product Description
Pure Copper Coil
The enameled pure copper coil is resistant to high temperature of 180℃/356℉, with low temperature rise, long service life, strong magnetic field, and “F” insulation level.
High Performance Bearing
With the high temperature resistance of 180℃/356℉, this vibration motor is suitable for long-time high-load work. In addition, The other advantages of the bearing: high precision, low noise, smooth operation, long service life.
High Quality Aluminum Alloy
The shell of this small vibration motor is made of aluminum alloy, which has the advantages of light weight, small size, high strength, anti-oxidation and environmental protection.
Strong Sealing
This vibration motor is strictly assembled to ensure its strong sealing performance. Due to the excellent “IP65” waterproof and dustproof performance of the aluminum alloy shell, it can work normally and maintain high performance whether it is in a humid or dusty environment.
Professional Protection
This small concrete vibrating motor uses a special oil-resistant and anti-oxidation power cord, plus a vibration-proof outlet protective cover to prevent long-term vibration damage to the cable, which makes it extremely durable and has a longer service life.
Wide Application
This small vibration motor is widely used in specific gravity stone remover, wet and dry separator, linear vibrating screen, small vibrating screen, dry powder dosing machine and other machines, whether it is for a professional factory or a small processing workshop, it can provide excellent performance.
GPOAS 100W Concrete Motor Vibration Motor
Package List:
- 1*100W Vibrating Motor
- 1*Instruction Book
Note:
Be sure to fix the motor well, and make sure the voltage is 110V; when adjusting the eccentric block, be sure to ensure that the two sides are symmetrical. After adjustment, the screws should be fixed tightly to prevent the screws from falling off during vibration.
Parameter:
- Material:Aluminum Alloy + Stainless Steel
- Current:1.3A
- Power:100W
- Voltage:110V/60Hz(Single Phase)
- Speed (Rpm):3600
- Vibration Force:50KG/0.5KN
- Waterproof Level:IP65
- Insulation Class:F
Ron
2025-09-06 15:16:24
Very powerful, works well. The only issue I had was opening it to adjust the eccentric weights - you'll need a good allen key (hex key) for this. Also, if you are only going to use it for light duty work, perhaps get one of the less powerful models. I got the most powerful one, and it's probably too powerful for my use. But adjusting the eccentric weights has mitigated that to a certain degree.
J. Whitfield
2025-08-26 13:50:51
Works as intended. I use 3 of these on a 30x70 table for statue molds. Resonates throughout the table for a bubble free concrete product. I use the vibrator I conjunction with a Variable Speed Controller SCR Voltage Controller Fit for Routerperfect combo
Jim Smith
2025-08-13 17:40:31
Works great for my vibrating tumblers !!!!
Rick W.
2025-06-29 11:15:12
Better than expected
Graham
2025-06-10 19:24:48
Got to test as a replacement to my pneumatic vibrators in our precast plant. Doesn't quite have the amplitude I wanted but it works well for our bench top prototype pouring.
Art H
2025-02-12 16:55:39
I am using two of these, one on a 45" x 18" home-made soil-sifter and ramp (see photos), the other on a 7' long plywood conveyor with a washer I added later (not shown). Both motors have run continuously for 2 to 4 hour stretches with no over-heating. They both have operated for more than 10 days, so figure 40-80 hours of steady use.They provide good uniform vibration. I have the 100 watt unit, and would not want any less. I have not attempted to adjust them.They appear well painted and of anodized or stainless steel where metal is exposed. They are in a location where they are frequently splashed with water but show no signs of rust.The mounting plate is solid, with sturdy alignment slots, and forms a great connection with the 3/4" thick plywood bases I bolt them to. The wiring connections and grommet are good, and there is adequate cord length for installation.
Stacy B.
2025-01-28 14:43:26
Died after 2 months. Couldn't reach seller for replacement. Contacted Amazon and they couldn't contact seller either and thankfully Amazon gave me a refund. Buyer beware.
old time reviewer
2025-01-17 11:36:16
i chacked ans this is the same type they use on Gold Rush units, great price and has a lot of power - I suggest a dial in regulator for it.
Recommended Products
$2,499.00
$ 99 .00 $99.00