Your cart is empty.
Your cart is empty.Product Description
High Quality Aluminum Channel Cooling system
This channel using Very high quality Aluminum material ---6063-T5 which will make good heat dissipation for the led strips(not including) . If use led strips alone ,the strips will keep very hot inside led chip , it will be dim very fast . The aluminum channel system will make led cooler and last longer , also will make light looks beautiful .
Aluminum material is Anodized , it is anti-corrosion and can be cut down to any length you want by a hand saw or air saw.
Noted: Check the width size of your strips and strip-connector to be less than 10.2mm before buying this channel; if need for Philips hue plus strip please search"B07V59DHK1"
Easy Installation with milky Cover
This cover for the led channel is made by good quality Flame retardant material ,and will keep not turn yellow for 2 years . With milky cover ,the light will make more softer and anti-glare.
The cover is very easy to install :
>Insert one edge of the cover into one side of the aluminum channel
>Snap and press another edge of cover into the opppsite side of the channel
>Press the cover along with the channel
Q:Are this channel are dot-free?
A:Dot-free related to both the LED strips and channel , If you use 120leds/meter strips, it is dot-free. If less than 120leds/meter ,you might still see the dot,but still good .If you use less led/meter and still want to see the dot ,you need to find a channel which is more bigger and deeper.
Updated Endcaps and Connection
We updated the endcaps for channel which will more stronger than others ,and avoid the light leak from the channel.
There are extension connector (search B078N1MDPY ) and L-shape corner connector (search B078MTM8XT) for the channel
Noted : The connector is not including.
More Accessories including
We provide more accessories than others .
Package includes:
10 x 2m (6.6ft) Silver Aluminum V-channel
10 x 2m (6.6ft) Milky PC cover
50 x Mounting clips
48 x End caps (24pcs without hole and 24pcs with hole)
50 x Screws for woodiness
50 x Screws for hard wall and ceiling
M. Fischer
2025-08-12 19:12:13
I have wanted to install WS2811 LED strips outdoors and settled on this V shape channel since it would fit very nicely on the bottom of my fascia boards. By installing these on the bottom of my fascia, they are almost invisible when not lit. My fascia is painted white and the milky white covers blend in seamlessly when the LED strips are off.Installation was relatively straightforward. The 2m strips minimized the amount of joints I had to do. I also used their 1m product so I could easily overlap the cover joints while maximizing the use of 2m milky white cover strips. I attached a clamp about every 19 - 20 inches and used a large clamp at the junctions of two rails. Once I had a rhythm going for the installation, it all went in pretty smoothly. The installation of the LED strip lighting was quite easy. Installing the milky white cover took a little effort to ensure both the top and bottom snap in solidly in the channel.Overall I am very happy with the result. Time will tell how these will hold up to the Southern CA sun but based on some tests I did with sample product, I did not see any detectable yellowing of the milky white covers. I realize this product is not rated for outdoor use but I did not see any comparable outdoor rated product. The channel material is aluminum and should hold up being installed outdoors. The bracket hardware and screws and standard sheet metal and will likely rust with direct exposure to rain and high humidity. Mounting these to the bottom of the fascia minimizes direct exposure to rain and generally, we have low humidity in Southern CA.
scotsman19
2025-07-06 12:27:18
We installed these to give our accent/party lighting a nicer look and make sure it stayed on the wall. It looks nice and gives a pleasant glow on the wall/ceiling despite the hotspots on the cover. It will take more than what these and a normal LED tape strip can offer to get rid of those so I'm not holding that against these. The hardest part was lining them up evenly together in a line, but that's always the nature of hanging things.The LED tape attached cleanly in the provided space in the channel and the cover attached with a little effort, but not too bad. It doesn't slide and has to be pressed into place so start in the right place or it will be off when you get to the end. We angled ours up so it would create a gentle area glow and so there was less reflection on the TV. You only see the channel when you first walk into the room. They look good enough our neighbors wanted to know where we bought them when they first saw them.I also bought the matching extension connectors from the same company to keep the pieces lined up cleanly.The LED tape connector to add the second piece of LED tape barely fit under the cover and causes a little bulge.
Mia Wernega
2025-06-20 16:59:09
This tape light channel was exactly what I was looking for! It was very easy to install and the frosted cover helps diffuse the LED lights so the whole room gets lit. I would buy this again if I had the need.
Jeff
2025-05-28 16:09:28
Every LED on the tape shows through independently. So you get a bunch of little points of light instead of one long glow. Hard to mount with the little screws they supply. Once the track is up the rest goes together pretty easy.
adrian
2025-04-30 16:29:10
BADASS PRODUCT.
Quentin
2025-04-23 14:07:46
Product is exactly as described, nothing more nothing less.The first box I received was bent, I emailed the seller directly and they sent me a replacement right away no questions asked. They even sent me extra compared to my original order!
Robert Anderson
2025-04-08 15:11:37
I used this in my soffit for my LED tape lights.Screws are tiny and the clips used to snap the track up are fiddly and sharp.Once the track is up and the lights are in, snapping the covers on are a PITA.If you survive through all of this, it's great.
feefee
2025-02-13 15:03:19
Even though the dad didn't listen and installed these like super close to the ceiling these are good enough. The teen didn't see anything wrong so I won't have him drop them. I think they are better installed a foot or two below the ceiling so you can have it angled and reflected further in the middle of the ceiling but eh... You can only repeat yourself so many times. These are the best bang for your buck I've found. And I usually look a lot before buying. It only diffuses the leds a little you can still distinguish the dots but hey its for a teen and he's happy enough. It doesn't need to be disco grade. it works.
Recommended Products