Your cart is empty.
Your cart is empty. This misting nozzle does not need to use air compressed, can use liquid pressure to form a very fine mist, excellent misting effect, energy and water saving, low cost, good effect.
The nozzle requires simple maintenance; soaking periodically in misting nozzle cleaner to remove mineral deposits that may accumulate with usage.
Specification:
Material: Brass, Stainless steel
Thread size: UNC 10-24
Orifice Diameter: 0.1mm / 0.004"
Pressure: 3-70 kg/cm
Flow Rate: 10-30 ml/min
Total Size: 10mm x 10mm / 0.39" x 0.39" (Max.D*H)
Package Content:
10Pcs x 0.1mm Misting Nozzles
Darlita
2025-07-29 11:27:24
These fog emitters work great! I bought a fan misting kit and nearly flooded from the amount of spray. These replaced the larger flow emitters and I couldn't be more pleased! It is a fog, not so much a mist. I think I'll need more because I have a pretty large gazebo area to cool but at least it won't be soaked! Nor will I!It's possible since they are so small theyay clog faster. I anticipate that, and emitters should be maintained and soaked to clean periodically anyway.Shipping was fast, product seems to be of good quality. I'm glad I bought them!
js
2025-07-06 14:24:38
Our mister quit working, all it took was new peices. These shipped quick and worked well.
Suzi Isenhouer Smith
2025-06-03 10:00:30
We have misters around our patio and every 4th of July they are a must. This year it was time to replace the almost 8 year old mister nozzles and these were exactly what was needed.
Mig
2025-05-12 13:47:48
Wasn't sure of the hole diameter I needed. The next ones I get will be the 0.3 mm, as they will spray a little wider mist.
Youwillneverknow
2025-04-14 11:28:46
This is exactly what I wanted something with a finer mist that would use less water and keep from spraying on the ground. I'm using this on a Ryobi Mister fan with bottled waters where I plugged one of the misters and am only using the other one. it can run 30 minutes on a bottled water. The finer the mister the easier it can clog up but using bottled water seems to help a lot.
Jeff
2025-04-03 14:17:05
Got these for a Ryobi misting fan because the originals would drench you, these solved that problem. Only complaint is that I wish I didn't have to buy so many.
Happy-Leroy
2025-03-26 11:55:47
It has all the same specs, but it does not work with the ryobi mister fan.
Paul
2025-03-17 10:25:20
I have a Ryobi mister fan than is battery operated and pulls water from a bucket, only problem was it would drench you and everything near it with water. I changed the nozzles out with these and I have a much finer mist! I can even use the fan in my garage without soaking everything.
RogerG
2025-02-17 15:01:40
These work perfectly as a replacement in my "Arizona Mist" low pressure misting system.
Customer
2025-02-14 10:14:36
Fits perfectly on my old Ryobi R18MF misting fan. The droplet size is nice and small - the mist that comes out is super fine and perfectly atomised.The quality looks great. Each item has its O-ring seal in position.Quite happy.Oh, and it came a good 7 days earlier than expected to Perth Western Australia.
Recommended Products
