Your cart is empty.
Your cart is empty.Feature:
- 1. Pure copper electrical conductor has good electrical conductivity, low resistivity, electroplated surface to prevent oxidation.
- 2. The housing is made of flame retardant insulated material, long life, anti-aging, resistant to high temperature and voltage.
- 3. M3 screw mounting hole.
- 4. Easily complete wiring, just push up the lever and insert the stripped wire.
- 5. Compact and lightweight, can be used repeatedly.
- Conductor Compact Connectors Lever-Nut Wire Connectors for Circuit Inline Splices 28-12 AWG,Quick Splice Terminal Blocks Wire Connecting (2 in 4 out)
- Product description Wire Cross section:0.08~4.0mm²(solid), 0.08~2.5 mm²(stranded)
Davey Boy
2025-09-02 17:56:45
These work great with 22AWG wire and standard jumper wires. The levers snap tightly on each wire not unlike a mouse trap! I had been using cheaply made terminal block connectors with a couple of dozen paired wires and was constantly dealing with loose connections that were hard to track down. Now, the one in/two out connections have helped resolve those problems.
Mark D Penkower
2025-08-27 17:19:50
I bought these to join wires for some electronic projects. I didn't want to have to solder or perform ugly and insecure wire twisting + electric tape jobs. These perform strong and safe connections with a variety of gauge wire.Highly recommended!
Space Toast
2025-08-25 13:27:18
I used these with stranded, 2-wire, 16ga CL2 cable when installing a 70v commercial audio system in my son's restaurant. Even though the cable conductors were made with a lot of very-fine strands, these connectors held them tightly, and they allowed me to use just 1 connector to create parallel drops to speakers from a single source cable.Other lever nuts or push-connectors would have required a separate connector for each wire.I would definitely buy these again.
Jersey Shore Buyer
2025-08-24 15:10:07
Worked fine.
John M.
2025-08-21 12:50:10
I use these connectors in a low voltage application, but they work just as well fir 110V.AC
DrJekyllMrHyde
2025-08-03 11:17:52
does the job
Kathrine
2025-07-30 13:08:33
Does not work well with 12 gauge wire
Richard C. Drew
2025-07-25 11:59:06
Solid connections, the little levers pinch the top of the wires down and back sandwiching them between two connection points - edge on top, flat surface on the bottom. Wires take more effort than required with wire-nuts to pull out. The connectors are reusable - simply pop up the levers and pull the wires out. No tools required.
Davey Boy
2025-07-24 13:32:06
These work great with 22AWG wire and standard jumper wires. The levers snap tightly on each wire not unlike a mouse trap! I had been using cheaply made terminal block connectors with a couple of dozen paired wires and was constantly dealing with loose connections that were hard to track down. Now, the one in/two out connections have helped resolve those problems.
Mark D Penkower
2025-07-07 17:29:34
I bought these to join wires for some electronic projects. I didn't want to have to solder or perform ugly and insecure wire twisting + electric tape jobs. These perform strong and safe connections with a variety of gauge wire.Highly recommended!
Space Toast
2025-06-02 10:24:48
I used these with stranded, 2-wire, 16ga CL2 cable when installing a 70v commercial audio system in my son's restaurant. Even though the cable conductors were made with a lot of very-fine strands, these connectors held them tightly, and they allowed me to use just 1 connector to create parallel drops to speakers from a single source cable.Other lever nuts or push-connectors would have required a separate connector for each wire.I would definitely buy these again.
Jersey Shore Buyer
2025-05-24 15:18:25
Worked fine.
John M.
2025-04-16 15:37:13
I use these connectors in a low voltage application, but they work just as well fir 110V.AC
DrJekyllMrHyde
2025-04-04 12:25:28
does the job
Kathrine
2025-02-23 12:23:27
Does not work well with 12 gauge wire
Richard C. Drew
2025-02-14 13:09:40
Solid connections, the little levers pinch the top of the wires down and back sandwiching them between two connection points - edge on top, flat surface on the bottom. Wires take more effort than required with wire-nuts to pull out. The connectors are reusable - simply pop up the levers and pull the wires out. No tools required.
Recommended Products
