Your cart is empty.
Your cart is empty.Product Description
PRODUCT FEATURES
- DURABLE MATERIAL, portable and extremely durable water transfer pump with heavy duty stainless steel construction for durability.
- PORTABLE HANDLE, built-in non-slip handle make it easy to set-up and operation or take it to anywhere.
- STABLE BASE, prevent pump from skidding during operation.
- COPPER COIL, use 100% copper wire to ensure efficient and stable operation of the motor.
COMPACT SIZE
- ETL Certification.
- This pump equipped with carbon steel pump housing which is wear-and-tear and won’t rust.
- This lightweight, portable, small pump is easy to store and transport.
- Perfect for transferring water from aquariums, washing machines, water beds, water heaters, clogged sinks, and more.
SPARE PARTS INCLUDED
- INLET SUCTION STRAINER, remove water down as low as 1/8in level.
- 6FT SUCTION HOSE, 3/4in garden hose made of premium stainless steel, won't rust or break under high pressure, resistant to puncture and sanding by the ground, can be used for a long time.
- REPLACEMENT PARTS KITS, the extra impeller brushes can greatly improve the service life of the pump.
- TIPS: The impellers&carbon brushes also sold separately in our store.
Trupow Tech
- If you have any questionss, please feel free to send us message.
- Our Team will response you in 24hrs, and do our best to offer satisfactory solution.
CP
2025-08-31 16:35:33
First of all, this pump is not submersible. I accidently got it wet and I had to completely dry it out to get it to stop tripping my ground fault circuit breaker. Be careful when useing the shallow water attachment so you don't get the pump motor wet. Other than that, it works great. I useed the included hose on the input side and about 50' of garden hose on the outlet side and it delivered about 5 gal. per minute with a lift of about 5 feet. I used it to drain the last few inches of water from my in-ground pool. Works great.UPDATE: After using this pump a few times it failed. Two problems with this unit: The impeller hardnes up and drags n the housing. I guess that’s why they give you a spare impeller. I(f you plan on using it for a long time, I suggest you take the cover off the pump housing and keep the impeller in a cool dry place. Secondly, the pump housing corrodes very easily and drags the impeller so it doesn’t pump. Again, after use open up the pump and to lubricate it and clean it and let it dry out or it won’t last very long.
David J.
2025-08-13 15:24:23
I LOVE this pump completely! I needed a pump to remove water from my dry-treatment crawl space that gets some water in it after heavy prolonged rains here in Maryland. It was a pain using my 3 gallon wet vac crawling in and out of the crawl space entry several times. With this pump I crawled in once, sucked the water out and was done. What took an hour or more before took 10 minutes with a lot less aggravation. I used a 50 foot hose with about a 2 foot elevation and the pump worked great. I solved the no switch problem on the pump by purchasing a 3 prong grounded switch rated at 125 volts here: https://smile.amazon.com/dp/B01M7V6U2Q/ref=cm_sw_em_r_mt_dp_U_g1kiDbTGXA1FZ and I was also really happy I ordered a hose filter to protect the pump as there was some debris I needed to clean out twice for maximum pumping power. The filter I purchased here: https://smile.amazon.com/dp/B00190OF9M/ref=cm_sw_em_r_mt_dp_U_DdliDbZZTBXPW is an inexpensive way to protect the pump and worked great. For my purposes I just used the provided feed hose to suck up the puddled water because of the uneven surfaces that prevented the included flat suction attachment from working efficiently. I highly recommend this pump for the price and value. Oh, I didn't think it was as loud as some people thought, but it is only for sporadic use and not continuous. Also, the pump didn't get hot as long as water was flowing through it.
Laura Helms
2025-08-09 17:03:13
This pump is lightweight and very easy to operate. I use it to water flower beds where I have no water source. This pump with the 60-gallon water bladder (believe it or not) I bought allows me to water large flower beds with relative easy. I believe other users have commented on shut-downs brought about by overheating. I've experienced that as well, though obviously I am using it when the outside heat is very high. Despite that issue, I am happy with the product and would purchase it again.
kgunnIT
2025-07-28 11:58:05
Just got this pump and used it for the first time. Worked great for emptying out an inflatable pool. Pool can hold something like 250 gallons, took this pump about 1.5 hours to empty it, but it was far more efficient than me trying to empty it with buckets or trying to siphon it with a hose. The pump was powerful enough to pump it through about 75ft of egress hose to a sprinkler.Note: this pump does say it needs to be primed with vegetable oil, then filled with water before turning it on, but it's not difficult to do and only takes a small amount.Great pump though, looking forward to using it with my rain barrels when this summer.
Alfred Colvin III
2025-07-03 18:16:46
This pump is trash and I would not recommend anyone buy this product. My main frustration is design it's designed to need water to run without having a primer to prime the pump needless to say if you could move the water to the pump you wouldn't need a pump at all. So my experience was horrible with this product and the motor is way under power for a garden hose stay away from these cheap made products.
breadrunner
2025-06-11 10:49:56
2023: This is essentially the same pump I've had for 20 years. After burning through two sets of brushes over time, I decided to replace with new, as it's hard to source replacement brushes and impeller. It appears that different companies obtain the basic pump from the original manufacturer and rebrand it, as I've seen exactly the same pump here and there, with different brand names.Works fine -- I use it as an auxiliary for my main sump. Also useful if your washer or dishwasher is broken and you have to pump out the retained water.2025: Just short of two years old, it wouldn't move water after 6 months being idle. And the motor was turning slowly. Opening the pump body, I found it full of gelatinous goo (don't know the source, as I only pump clear sump water). I cleaned out the chamber and impeller, greased it all with silicone grease, and reassembled. Still wouldn't move water, and looking in I could see the impeller turning super slowly. Removing the cover plate, it spun fast. My conclusion: the original gasket (top left in the photo) was too thin, and the cover plate was squeezing the impeller so hard it couldn't spin freely. I tried silicone grease on the front and back plates, but that didn't help. Finally I cut two gaskets from an automotive gasket sheet, and used the two together to give more clearance. It worked -- started up at full speed and began moving water after a small prime poured down the outlet hose. Also it's quieter than it used to be, which I suspect is either because the motor isn't working as hard, or the impeller friction is reduced, or both.Beyond that, I'd recommend that if your pump is going to be idle, you open it up and dry and grease the walls of the chamber and all the parts.
Tinisha
2025-04-08 09:22:47
Battery life is excellent, it flows good, it’s very durable it’s been over 5 years now and no issues
ronnie
2025-03-22 13:03:14
good
Customer
2025-02-10 17:47:20
Good product
Neil M.
2025-02-09 14:40:25
Upon unboxing and setting up it seemed ok but on the 2nd use it was leaking quite badly. I was able to make the leak better but had to secure the pump connections down to ensure it wouldn’t short out due to water getting inside. The after 2 weeks it died completely and went in the trash.
Recommended Products
$790.05
$ 99 .00 $99.00