Your cart is empty.
Your cart is empty.Product Description
Get FrameSaver and kiss frame rot Goodbye for life.
FrameSaver vs. the Competition:
- FrameSaver vs. Wood: Wood frames wick water, swell, mold and rot. FrameSaver never rots or molds, and the composite bottom won’t wick water or swell.
- FrameSaver vs. Treated “Rot-Resistant” Wood: Rot-resistant wood frames delay rot and mold, but fail to prevent it completely. FrameSaver never wicks water, swells, molds or rots. Ever.F
- FrameSaver vs. PVC Full-Composite: Composite frames can’t be finished exactly like wood and are flimsy, affected by heat and cold. FrameSaver machines and finishes just like wood, and because FrameSaver is made of real finger-jointed wood, it’s durable and unaffected by heat or cold.
Teresa
2025-08-29 11:56:33
I used this to replace the rotten door jamb on my exterior door. It fit well and the weatherstripping fit perfectly after it was installed. It took a fair amount of time to install, about the same amount of time as it took to replace the entire door. The door was still in great shape and to replace it with one that had a composite frame was several hundred dollars. I had to use tapcon screws to secure in place because it was concrete block on the bottom. I replaced the rotted brickmold with pvc version. Once everything was filled, sanded and painted it looks great! I made sure to line up the edges where the groove for the door weatherstripping was and sanded the slight mismatch on the other edges. Being composite on the bottom it should last for the life of the door. Next time I replace the door I plan on getting one with a composite frame. I recommend this and just take your time to install. The instructions were good.
Jay A. Brunn
2025-08-16 11:03:24
Had a door with bottom rot on the jambs, and did not really need to replace the whole door or go through the effort of a new frame with door refitting. I found this solution and was very pleased with outcome. Very detailed instructions which were helpful. I do have carpentry skills and the tools so this install went very easy. A couple tips for those considering this fix: Remember to shim carefully to get the pieces secured to the framing so when you drive the screws the piece will not move inward, I usually cut the piece a touch long and then make very thin cuts on miter saw to get a tight fit. You can also shim under the repair piece. Comes with a left and right side so be careful. I filled the countersunk screw holes and lightly sanded the entire area and gave the frame a nice new coat of paint Quality material with the composite fused onto the bottom for many years of rot free use. Great product.
robert c.
2025-08-03 18:35:53
I bought and installed a frame saver. First to note the unit is well made and thought out. When you order you will receive a pair of frame savers good enough one door complete. To install you must cut thru the side anchors for the door sill. I drilled and re-anchored the metal sill with tapcons to the conrete slab below. I was very careful aligning the frame saver kit with the original frame. I also added more anchors from the original door frame to the jamb studs to keep the remaining frame in place.
lmn_34
2025-06-08 19:10:08
This pair of door jamb repair sections was very easy to install after cutting out the rotted wood with an oscillating multi-tool. Fit was excellent and I would use this product again.
GT
2025-05-11 14:36:21
An engineered solution to a common problem. Excellent directions on installation and description of the valued replacement section.
JGD
2025-03-17 17:15:15
Great idea and quality product. Much better than replacing the entire door frame. Simple procedure
acornbob
2024-12-12 18:53:11
Quality product. Composite bottom 1/3 should prevent rot from happening again.
William C. Ladley
2024-11-14 12:23:32
This product fit perfectly and the door jam looks just like new.
Recommended Products