Your cart is empty.
Your cart is empty.Product Description
Dario Galvez
2025-08-14 20:16:10
As I said in the title, the Quality of the Resin is superior, I have been able to use other Resins from other manufacturers before, 3 to be exact, and it is more difficult to work with them, both because of the drying times and the fact that many bubbles were trapped under The Resin, despite being careful when mixing it so that it does not fill with air, on the other hand, the Venom Carbon Resin was easy to work with, as it was less thick it was easier to eliminate the bubbles that remained and a few that I could not eliminate with the heat gun were eliminated by themselves when I returned to check the already cured piece, this Kit is incredible, I will surely buy it again in the future, I recommend it, in my case it was to do a Skinning job, I tried to give a forged finish with the Carbon fiber and traditional Twill, the entire experience was excellent, I recommend this product just make sure you follow the manufacturer's instructions to the letter
Richard Hemingway
2025-05-10 15:45:34
never before have I carbon fiber wrapped anything, but I can see I'll be doing it more ofteb now. I wrapped a 3d printed object with this carbon fiber, after learning a few tricks, like spraying with spray adhesive before handling, helps keep the cloth together nicely. then I learned I can cut it with my 40watt laser cutter, that was the biggest game changer. I ended up spray adhesive my pieces to my object then wet them down real good and that resulted in my best looking work. since I didn't have peelply or vacuum set-up, I wrapped each part in saran wrap then tightly wound electric tape around that, giving me a nice tight fit. after some sanding apon unwrapping it came out very nice and smooth. I can't quite put a picture up to show it off because it's a customer's product and it's yet to have a patent, but I will be using this kit again in the future and quite often I'd expect, after seeing how easy it is to do. oh and it's definitely strong, very strong for the single layer wrap i did, I didn't expect that much strength in a single layer. this can add strength to many 3D printed projects, I wish I had tried this years ago.
Mario
2025-05-09 10:42:55
The kit is great, wish the carbon had sort of weave lock. It can easily distort if you are not careful. This is my second project and have made a few mistakes nothing on the kit more the user. The epoxy is easy to use, do t forgot I measure your amounts get a digital scale.
Roger McGuire
2025-04-04 15:12:55
Well the cloth was taped and once I ruined a bit of cloth untaping it was fine it's very fragile to be taped closed i think anyway after that was fine epoxy and hardener both worked well together but dont listen to the instructions they state you have 23min before it starts to set up but it's more in the neighborhood of 2hrs my first piece I al.ost ruind because I thought I had to work fast but I didnt so I put my piece down way to soon but after I found out the instructions were bogus I was able to finish without any more problems nice fiber nice epoxy
Michael fiala
2025-03-27 14:10:01
The media could not be loaded.
Mark
2025-03-21 12:40:38
Good customer support. Made in America. Good value and quality product
Nbs Performance
2025-02-15 15:45:14
The media could not be loaded.
Jeff Murphy
2024-12-01 15:20:30
I have never used carbon fiber or resin before, so I didn't know how much I would need or how much to spend. For the price, I had more than enough for my project with some left over to play with. The mixing instructions kinda threw me off a bit, but I guess it worked. Word of advice-use thin strips of tape to outline the CF you are cutting out, otherwise, it is likely to fray apart (not due to poor quality-just how CF works). The epoxy laid flat and clear. I would not hesitate to buy this again!
Recommended Products