Your cart is empty.
Your cart is empty. Specifications:
Voltage: 240 VAC/DC
Current: 2A per circuits
Speed: 0-300 Rpm
Circuits: 6
Housing Material: Engineering Plastics
Work Humidity: 60%RH or higher
Work Temp.: -40℃~+80℃
Contact material: Gold plated ring-Gold plated brush
nsulation resistance: 1000 Mω @ 500 VDC
Lead size: 225mm 30# AWG Teflon wire
Dielectric strength: Between each circuit and all other circuits,≥ 500 VAC @ 50Hz
Electrical noise: ≤10mω
Work life: Depending on speed and working environment, ≥50,000,000 runs ref
Outside dia: 12.5mm(0.49inch)
Flange dia.: 24mm(0.94inch)
Length: 15mm(0.58inch)
Applications:CCTV Monitoring System/Electrical test equipment/Medical equipment/obotics
Note:
Manual measurement, with small error. Please check size in detail before purchase.
Real colors may slightly differ from the pictures, as it depends on specific monitor settings and light brightness.
We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution.
Package Includes: 1Pcs
Customer
2025-08-30 16:43:12
It works, feels smooth, and there’s continuity across each of the six wires (not between them).Now, you mount the flange to either the stationary or rotating assembly. The other side is *not mounted to anything,* the wires are routed and boom, you can transmit power across an infinitely revolute joint.If you want to use this with a motor, it’s possible but not in the way other reviewers think it is. There are slip rings meant to be used with motors, they’re called Hollow slip rings. I use this slip ring within bearings, and my rotating assembly is driven by a ring gear and a stepper, so I don’t need the hollow type
Guitarzan
2025-08-28 13:06:43
I use these on solar trackers that revolve to always point at the sun. These are used on model boats, cars and trains which are solar powered and would otherwise twist the wires. I like to use all six wires for a two wire circuit which effectively increases the gauge. It’s sad to see people giving a low rating because they can’t figure out how to attach the end opposite the flange. You don’t need to attach it to anything. Just let the wires run out and they will not get twisted. Duh.
Thomas F. Lenihan
2025-08-24 13:48:00
Excellent product. I withheld one star because I believe that the shaft should be a little longer. I've purchased and used this item 3 times.
Sam Spangenberg
2025-07-14 11:15:08
This dandy little product allows you to wire an electrified moving item (small windmill or garden item, turntable, robotic arm, etc.) while the other end of the wiring remains stationary. This allows motion where required without twisting the wiring with each movement. The price is not too high given the nicely designed and small size though better description in the advertising would be welcomed.
Scott Walters
2025-05-16 17:06:39
Using on a rotating Christmas tree. I used in 3 wire pairs to run 120v -6A Christmas lights. The original wiper went bad and could have caused a fire.
reviews @%$!
2025-03-24 18:13:06
Returned.Stated specs were marginal as stated.Actual part is manufactured by Goco, Shenzhen Gaochong Electronics Co., Ltd.I have attached the manufacturers specs and description.The max RPM is 250, not 300, and the max amperage is 1.5A (signal only), not 2.0A.
Abe E. Normal
2025-03-17 10:25:14
The media could not be loaded.
Kevin d.
2025-02-22 13:08:29
I used it in a 3d printed windmill and works great
R3QU13M
2025-02-03 18:06:14
One part has a flange with holes which makes it easy to attach so a solid piece, but the other moving part is incredibly small, like ~4mm across and ~4mm high so it's almost impossible to attach something to it in a secure way.
Hakan Kok
2025-01-15 10:20:54
The piece is beautiful and useful. But it is very difficult to assemble any thing to the centre rotating part. The outer part can be easily mounted with 3 holes. But I could not mount the rotating part in the center to the shaft of a motor. And I gave up on doing my project.
Recommended Products
