Your cart is empty.
Your cart is empty.Product Description
Feature
- Tube inserts can prevent dirt and dust ingress.
- Made of black plastic with ribs to secure. Offer a neat and safe finish to tube ends.
- Multiple strong ribs for a secure fit, tube insert provides stability, provide longevity and strength to your furniture.
- Make moving easy and noise-free by installing them to the bottom of the application, such as chairs and desks legs.
- Ideal for a more professional finish on tubing enclosures on trailers, racking, shop fittings, or anywhere a finished look is needed.
Note Due to manual measurement, allow a deviation of 1 - 2mm. Please check our product size carefully and read the product size descriptions before purchasing to avoid possible unpleasant shopping experience.
Peaceful 6
2025-08-19 15:28:18
Mine are 4x4in (100x100mm) and were so easy to pop into the ends of the bumper. I found it easier to push them in from the bottom up. They fit snug.I don't know what they are made of but they seem like a very good replacement for the original bumper caps.
Thomas Taylor
2025-08-16 12:45:50
Worked great, a little trimming need but worked out
Bruce Arduser
2025-07-16 17:18:45
these were hard to find, but I did order them and they fit great
William S. Laskorski
2025-07-15 17:53:57
I bought these to replace the caps on a mechanic's creeper which has 3/4 inch thin wall square tube side rails. Two of the original caps were lost when I failed to notice that they came out on the driveway while I was changing my oil. The heads on these are slightly smaller than the originals, not quite 3/4 inch, but they are tight enough to stay in and aren't too tight to be hard to install or remove. I'm happy with them and having extras is good in case I lose any in the future. I deducted one star for the inaccurate size of the outside ends, but for me this is not a serious issue. I recommend them to anyone who needs 3/4 inch square tubing caps.
Homer
2025-06-20 13:07:32
These plugs fit great! I needed them to plug the ends of arms on wrought iron love seat that i was repainting, and could not find them anywhere. They are just what i needed!
Timtaddy
2025-06-11 15:14:49
Easy to install keeps the birds out of my boat lift tubes / frame!
B. Houghton
2025-05-17 17:52:42
These things fit good and tight and aligned well because I measured beforehand and ordered the right ones. They're perfect for 1-1/2 OD, 1-3/8 ID square tubing (1/16-inch wall). They will probably fit just fine in thinner-walled tubing, as the fins stick out almost even with the lid. I used a rubber mallet to get them in and they are likely never popping out like the ones they're replacing.
opi
2025-02-08 13:52:38
nice
Laurier Doucet
2025-01-18 16:13:15
Se fixe solidement.
Recommended Products