Your cart is empty.
Your cart is empty.Product Description
Speed Control Switch Instructions:
- The red wire is connected with positive pole of power supply and motor.
- The blue wire is connected with negative pole of motor.
- The black wire is connected with negative pole of power supply.
Package Included:
- 1* Car Heater with 4 Ports
- 1* Speed Control Cwitch
- 2* Mounting Brackets
- 2* Straight Fittings
- 6* Water Hose Clamps
- 2* T Fittings
- 2* Screws
Mark Harris
2025-08-28 12:29:29
awesome
Chai Xiong
2025-07-30 12:17:59
One of my food truck is one of the older truck that the heater just doesn't work anymore and I bought this to replace it.PROS:-- Nice unit-- Small and it fits right on the dashboard or in the front of the truck-- Pretty powerful fan-- Warm-- If you don't use any of the duct hose, it's blowing pretty powerful.CONS:-- The duct hose was poorly made. Put them on and the came off easily. Ended up getting the aluminum duct hose for them.-- Once connected, the fan doesn't appear to have enough power to push the hot air through those four hoses.-- Need to be very creative on how and where to install it or you are going have one ugly spider look-alike heater on your dashboard.OVERALL:I bought this heater mainly to keep the windshield warm during snow or raining season so it doesn't fog out. It seems to do the job. I wish the fan is a little bit more powerful so I can at least warm my feet, hands, while keeping the windshield clear of snow build-up, etc.
Mike Hare
2025-07-28 11:25:22
Havnt used it in very cold weather yeat but so far seems good
Landon Seaton
2025-07-25 16:33:48
The blower motor is super weak! Poor design. Your cab must be COMPLETELY sealed and you still better bundle up if you have any hopes of staying warm.
Just Don
2025-07-15 11:39:31
Hard to install but saved 100;s of dollars.
Jeremy
2025-06-25 14:18:39
Good heat for the price
Oakley
2025-06-22 19:58:13
Works good this it the 3rd one iv install in a vehicle heat is good but the speed switch isn't fun to get working if u don't do it right it brakes
longbeach
2025-06-12 15:20:20
Mounting brackets are comically weak. I took the case apart and mounted the box directly to the cab with 6 bolts. Didn't even attempt to use the crappy ductwork. Fits almost perfectly in a polaris ranger. Airflow is reasonable and heat output is suitable for a tractor or small utv cab that is semi-sealed.
Cole
2025-05-29 13:14:20
If you are even a little handy you should have no issue, I had to by a 1†to 5/8†fitting instead of the supplied fittings. Everything worked excellent it was -10 to -15 the last four days and I find once the bike reaches 180°F it well finally start to blow hot air!
Mike
2025-05-28 13:43:04
It looks to be a good product. Easy to install. The only problem was that the switch didn’t work properly. I had to pick up one at a local parts store. Installed it and it was fine.
R
2025-04-04 16:19:40
I installed this unit in my Polaris Rzr and it was super easy. Blower speed is very impressive and heat is very welcomed.
Northerner
2025-02-25 12:24:04
Metal box held together with metal screws which will shake loose with vibration.Heat core secured by same., fan same.Included switch does not work. It may all work for a short while imo.
Gary
2025-02-11 11:57:09
Metal fittings are not very thick but the heater works awesome.I used pex fittings
Recommended Products
$160.25
$ 67 .99 $67.99
$11.99
$ 5 .99 $5.99