Your cart is empty.
Your cart is empty.Product Description
IP68 Waterproof
Trailer light kit designed with drainage ports for extended life and IP68 waterproof rating to withstand any adverse weather and diving conditions
Two brightness levels
Two levels of adjustable brightness to suit the needs of different environments, such as lighting, contouring, steering, driving, etc.
Widely Used
Universal for Under 80" Inch width towing vehicle, such as semi-trailers, RVs, trucks, boats, snowmobile, campers etc..
Kelly M
2025-09-05 10:15:54
Seems to be made of decent quality. Installed easily. Very small holes in marker lights but easily drilled out to a little larger size of bolt.
Brandon W
2025-08-30 12:00:42
This kit included everything I needed to rewire and mount new lights. Good brightness and quality
TheJollySkipper
2025-08-17 10:43:51
As others have mentioned, there aren't enough frame clips to secure the wires, but if there weren't any at all, I'd just be grabbing a handful of wire ties out of the shop, so that's really no biggie. Those screws are worthless. If you don't already have some, I'd suggest ordering a bulk pack of nuts and bolts. I used M-6s.The rear center clearance light also has third brake-light capability. That's nice. Unfortunately, there's a big piece of plastic in the center on the back of the light-bar where the wires come out, that will need about a 1/2in hole drilled for. So, if you don't have a step drill bit set, you might want to order one. You'll need it for the mounting holes on that, and the other lamps anyway. The only lights that are likely to line up with the holes already on your trailer, are the main taillight assemblies. They bolted right on. But that's typical. Those lights are somewhat standard, but the marker lights have a million size and style options.Speaking of the marker lights, the ones in this kit have wires coming out of the back of the light, but there's no relief in the plastic, so if you want to mount them flush, you'll need to drill a hole for the wires. See pics.As for wire, I had just enough on a 20ft utility trailer. Which is a bit funny, when you consider that this kit comes with center rear clearance lamps and 4 amber clearance/side light and 2 red clearance side lights. Which are generally required lighting for much longer trailers. If you are buying this for a longer trailer, I might suggest going ahead and buying a decent trailer light harness. One that's sealed in plastic, like an extension cord.For the price, I'm still giving it 5 stars.I can make it work.As for the quality of the lights? Time will tell.UPDATE: I'm installing these lights and I wasn't paying attention, and went ahead and crimped a connector to the ground wire, planning on hanging in on one of the mounting screws. The wire coming out of the light is about a half inch short from being able to get on one of the screws. Also, the ground wire on the plug up front is VERY short. I started to lengthen it, but decided to drill a hole in the coupling and try to reinforce the wires, so it doesn't get snatched out in the future. Maddening. I dropped a star. I'll stick with the title, though. So far, still worth it.
Duke
2025-07-19 12:10:27
Was this a good purchase? Yes. LED light kits in the big box stores are literally twice the price. The lights work well, however there are a few things worth mentioning:1. Notice the lack of an endpoint on the ground wire on one of the lights.2. To run the wires along the right and left side of the frame, you'll need many more clips than the few that come with the kit. My solution was to use the six clips that came with the kit and I used clear Gorilla glue to spot-adhere the wire along the frame.3. The license plate holder is not aluminium as indicated on the instruction sheet.4. The kit comes with the male and female plugs, so you have to use both to make this work, as the male plug's shape would not permit it to plug into a standard female plug on my F-150. I cut off the existing male plug, bought a new male plug, and soldered it to the harness lead.
Customer
2025-05-30 17:33:59
I just installed this on my 16' trailer. I installed into the trailers factory directory tubing that's welding to the bottom of the trailer to protect the wiring. After removing the old wires from the tubing. I was easily able to push through the supplied wiring that came with this kit with only 1 issue. The left side wires where the perfect length to reach. But the right side I had to use and splice a extra 10ft of wire to reach the right length needed. The instructions where easy to follow making it easily connected. Otherwise the rear bar running light wasn't listed on the instructions to be connected but that really wasn't a big deal. 🤔 a little figuring is required.
Eric Jensen
2025-05-09 16:32:14
Easy to install. They look great on my trailer.
Mark
2025-04-01 13:44:14
I replaced the original incandescent trailer kit when they stopped working. Plenty of wiring for my 4'x6' trailer. Lighting is brighter than originals where.
Jesse Stoops
2024-12-10 13:39:25
This was easy enough to install, but my only complaint was that the wire was not very heavy. Better than HF, but still light. For the money, it’s ok. But just ok. That being said. I WOULD buy it again for the price. Depends on the level of quality you want.
Recommended Products