Your cart is empty.
Your cart is empty.Product Description
1/4" NPT Air Filter, Regulator & Lubricator AC2010
- Orifice size :1/4 "NPT
- Gauge port size :1/8"
- Maximum working pressure :1.0MPa (142Psi)
- Operating temperature range :40-140F(5-60℃)
- Drainage mode: Manual
- Filtration accuracy: 5um
- Pressure regulation range: 0.05-0.85Mpa
Adjustable knob
Convenient adjustable knob, easy to operate, just pull the knob to adjust the air pressure and then press down to lock the air pressure
High precision barometer
0-1.0Mpa high precision pressure gauge, can clearly and accurately display the pressure value of the tank
Preparation before use
Clean before installation to prevent dust and foreign matter from entering, and ensure that the gas flow direction is not reversed
Step 1
Hold the rotary button and pull up
Step 2
Turn knob to adjust air pressure
Step 3
Keep an eye on the air pressure gauge and adjust the air pressure to the right value
Step 4
Press the knob to lock the air pressure value
J.T. Lilleskov
2025-08-30 16:14:55
I work a lot with air tools and have been running my tools straight off my 20 gallon air compressor running at 125psi because I didn’t have a regulator to knock that down to the 90psi my tools like to run at. I rigged up a system to make this work and it worked great initially. I was able to regulate the air pressure well and filter out the water that was carried in the lines. All went well for the first month or so. However, I have had to replace an o-ring on the frequency every month or so on the regulator head and occasionally have to reset the regulator because it works loose and changes sometimes on its own. In addition, the paint is not super durable and has started to come off despite being in a safe spot hung on my wall and out of the way of anything that could bump it. But it does work as it is supposed to still. If I get a year out of it, I’ll be content. I’m a third of the way there already!
WubbaLubbaDubDub
2025-02-20 11:52:13
1/4" NPT Compressed Air Combination Filter Regulator Lubricators,Water/Oil Trap Separator Air Pressure Regulator,AC2010-02 Compressor Water Separator. Well built and durable. Recommend.
caz345
2025-02-17 15:23:07
Regulator setup is nice. the inlet and outlet of the regulator I got was 3/8 NPT. which is what I need because I use hi flow connectors and all my tools have the hi flow nipples on them. the bowl guards are metal and come off easily buy sliding a button the twisting the bowl. This setup has a water trap and a lubricator too.The only disappoint is the gauge This was advertised as a 0-150 psi gauge but it is not rated in PSI or Bar but in something metric so I had to go out and buy a new gauge the one I got hat a 1/4 Npt nipple but the regulators port is 1/8" npt so then I had to order a reducer so I could use the gauge, I couldn't find a gauge with the 1/8 pipe fitting on it in the 2 stores I went to so I dinging this a star for not having the correct gauge as advertised. Other than that it seems to be a solid piece of equipment. Im using this on a 60 gallon Ingersol Rand 220 volt compressor. Thanks for reading.
Kairi
2024-11-18 17:03:00
Would be good for maybe an airbrush setup. Itis smaller that I thought it would be but seemswell built. I needed a 3/8'' unit.
Recommended Products
$19.20
$ 8 .99 $8.99