Your cart is empty.
Your cart is empty.ROD END SPECS. ECONOMY TWO PC SERIES THREAD SIZE: 1/4"-28 BORE: 1/4" (.250 ) BALL WIDTH: 3/8" (.375 ) BALL: 52100 HEAT TREATED CHROME PLATED STEEL BODY: C1045 HEAT TREATED STEEL THREAD LENGTH: .687 OVERALL LENGTH: 1.692 RADIAL LOAD: 3,820 lbs ZINC PLATED
J30067
2025-08-17 19:48:04
nice qualityused for drawer pulls
t norris
2025-08-12 17:33:03
I am using these Heim joints for a track bar and radius rods for a small DIY offroad vehicle I am building. They are well machined and solid. Note that if the main body of the rod end needs to fit between the the sides of mounting bracket, you will need to use spaces on either side of the ball. The body is 3/4 in across the flats, the ball is only 5/8 in wide.
bravocharleywindsor
2025-08-11 18:26:15
Basic rod ends. Materials and finish seem good. Bearing elements seem good. got these for some lift table type projects. Too soon to tell how well these will last under load, but I suspect they'll be fine. The leads I'll be working with will not be excessive.
Andrew thompson
2025-07-20 21:58:01
Dimensionally accurate, threads were all nicely machined, the bearings were smooth. I used these to make a shelf in my garage that fold up and down. Not much to say otherwise, no complaints here
jrperki
2025-05-02 14:53:09
These were 1/2-inch fine thread.They move freely but they aren't loose.The thread walls are substantial.This is a good quality product.
Mildly Cranky Johnny
2025-02-20 14:44:27
1/2 x 1/2-20 Rod End Bearing Heim Joints Right Hand Female Thread Heim Joint,RH 1/2"- 20 Thread x 1/2" Bore Stainless Female Rod End Bearing with Jam Nuts (1/2-4Pcs)these seem fine. i didnt realize it was fine thread. i was expecteing to use with conventional 1/2" thread rod. sadly this is 1/2-20 not 1/2-13. so will have to come up with an alternate plan for my use case. that said, i see no issues with the gadget itself. the movable end is greased and moves very smoothly. just be sure you are aware of the thread pitch.
felix
2025-01-03 17:55:26
These are sturdy and well made and come with everything I needed to put them to use. The bearings are smooth and the kit feels like good metal that doesn't give up its shape easily in the threading. Happy with them for the cost, definitely a good value
Dave M
2024-12-23 15:15:28
All threads on the joints and nuts check out good and fit well. Rod end eyes are neither too loose or too tight. Great for smaller linkage projects!
Recommended Products
