Your cart is empty.
Your cart is empty. Package Includes
Ratchet T-bar,
Drill holding adapter,
Puller outer housing,
Force screw,
Force nut,
Top connection removal tool star socket,
Allen key,
Dual-size high-tensile step drill M8 & M10,
Pilot drill centring sleeves,
Pilot drills 3.5mm,
Tap: 1/4", M8, M10,
Puller adapter mandrels
Removes 8mm and 10mm glow plugs
Designed for removing damaged or difficult glow plugs from the the cylinder head
Freddo
2025-09-07 10:25:22
This kit worked very well on a 2004 Jetta TDII had a glow plug snap right under the nut, and with this kit I was able to remove the electrode within the plug, drill out the threaded area, clean threads in the head, and tap/pull the remaining lower body of the glow plug. Take your time drilling, measure how far down you want your bit and use tape or a paint marker to mark how far you want your bit to travel, before starting. Also, take your time tapping! It should not take all your strength to clean threads or tap new ones. If it feels very difficult to turn, you may have bottomed out in your drilled hole.Search out video “5205 Laser Tools Broken Glow Plug Removal Setâ€. The set used in that video looks identical to this one, and it has very good step by step instruction.Very good value, I was expecting to pay much more than ~$30 for a kit like this.
steve
2025-08-31 14:00:55
Tried to replace galled # 4 glow plug on 2006 Jeep Liberty diesel. Glow plug broken off just below the hex head. Step drills are too short and would not cut the material. Taps did not fit in Tap "T" handle. 10 MM tap would not start. 1/4" tap would not start. After hours of frustration ordered Wise Tool Kit # B900-0199 hoping I can avoid pulling the head on my Liberty.
Chris Jones
2025-08-25 14:08:04
Took over 5 hours and I had to braze a 7mm bolt onto the extraction mandrel of this tool to get a good bite in the broken off glow plug on a Mercedes, but it saved me pulling and/or replacing the head.
Customer
2025-07-28 14:52:03
Found drill bits break on first few turns of drill. Puller will work good if you have enough room around the glow plug hole. Make sure you drill down till you can see the cut lip of the glow plug past the threads. The step drill bit is a joke. Just use a regular drill bit and watch your angle to keep it straight with the hole.
Joel
2025-07-27 15:23:59
Worked great to removed seized glow plugs with motor installed in the vehicle.
Nate
2025-07-01 15:30:31
Every bit in the kit is junk. All snapped with no pressure given. Plastic would have lasted better. Will never buy this again. Definitely not worth the money in any way.
Customer
2025-06-09 18:32:37
If you use this it will destroy your cylinder head. There is no way to keep drill in place
M. Alexander
2025-05-18 18:22:13
Worst tool ever purchased. Used like I was told and threads pulled off. Now have to pull heads for repair. Would give 0 but in able too.
robert bolduc
2025-04-05 14:29:38
Good product and Fast delivry
Customer
2025-04-02 16:37:33
Perfecto
Michele
2025-03-31 17:38:44
buon prodotto, ho dovuto modificare la filettatura di un adattatore da 6mm. a 5 mm. perché il tipo di candeletta che dovevo estrarre era più piccola di diametro interno.
Richard Holman
2025-03-04 13:52:33
Really works well, great care needed when drilling out remains of the plug.It's very good quality for the price and equal to the branded Sealey versionWell good ðŸ‘
Bertrand K.
2025-02-15 14:23:01
Je devais changer les bougies de préchauffage sur mon Jumper 3.0 HDI. "Facile" aux premiers abords, ça n'est que des bougies...Jusqu'à ce que la première casse instantanément au desserrage....... Eh oui, la maladie des Jumper/Boxer/Ducato, cette foutue fuite au niveau de la baie de pare brise, qui laisse couler l'eau pile au dessus des injecteurs/bougies... J'ai beau l'avoir colmaté, le mal était déjà fait...2, 3 et 4e bougie, même resultat. OUI, les 4 bougies cassées!!!Ce kit a donc sauvé ma culasse, et mon porte feuille. Il m'a permis d'extraire les 4 bougies, dont une avec l'électrode bloquée à l'intérieur!Attention cependant, il y a une chose qui manque dans le kit: LA PATIENCE ;) allez y doucement, et nettoyez régulièrement avec un aimant pour enlever les copeaux que vous créerez!J'ai pris environ 5h pour extraire les 4 bougies, mais ça en valait clairement la peine!Il y a une tonne de tuto sur youtube, je vous conseille des les apprendre par coeur avant de vous lancer ;)
Recommended Products
$28.99
$ 14 .99 $14.99
$67.28
$ 26 .99 $26.99