Your cart is empty.
Your cart is empty.Product Description
Abount this item
Including 3 sizes & 900-count 18 gauge Stainless Steel Brad Nails.
- 2 inch ------------- 300 counts
- 1-1/4 inch -------- 300 counts
- 3/4 inch ----------- 300 counts
2 Inch 300-count
- Nail Length: 2- inch
- Nails per Stick : 100
- Pack quantity : 300 nails
- 304 Stainless Steel
1-1/4 Inch 300-count
- Nail Length: 1-1/4- inch
- Nails per Stick : 100
- Pack quantity : 300 nails
- 304 Stainless Steel
3/4 Inch 300-count
- Nail Length: 3/4- inch
- Nails per Stick : 100
- Pack quantity : 300 nails
- 304 Stainless Steel
RenP
2025-09-05 18:34:46
Works
Matou
2025-08-25 15:22:11
These Brad nails are non magnetic Stainless Steel not much more needed to say.These are nice nails that are more expensive than coated nails but I wouldn't use anything else fore outdoor projects! Great for use in bird houses.
William Kemp
2025-08-24 14:59:33
These can’t be beat in a salt air environment. I use them exclusively around my house, less than a mile from the Atlantic Ocean. I’ve seen too many steel nails rust and fail. They fit two of my different brands of guns.
Oak Cliff Native
2025-07-31 12:17:15
I am glad to now have stainless steel brad nails to use when humidity could be an issue. So far, so good.
K. Whitfield
2025-07-16 16:15:57
Great Product and Value
rick stephenson
2025-04-25 10:49:23
Love the variety and fit my Brad nailer perfect.
Name unimportant
2025-03-26 12:58:43
I don't use my Arrow Nail Master 2 ET200 18 gauge electric nail gun often. So, it didn't make sense to buy large quantities of single packages of different sized nails. This selection solved the problem. There are enough different sizes to handle the occasional jobs and the total price was less than a single package of one size. The price made it a bargain. One caution: check that your nail gun can take all the sizes. I thought mine took the 2 inch size, but I didn't confirm that. My mistake; it won't hold them. Hope I can find someone who can use them. Don't make my mistake and you'll be very happy with these.
TabbyInRosin
2025-01-02 14:46:21
I had no problem with the 1-1/4" brads.The 2" brads are a different story. While my galvanized brads that came with the gun (DeWalt) still shoot fine, these stainless steel "SITLDY" brand brads were visibly not like the others in the package;* One clip had to be separated and a few nails thrown away because it had overlapping nails.* The glue was extra heavy and inconsistant.When used, here are the problems I found;* About 1/5 of the brads worked properly.* I gave up after the first clip.The rest either;* Jammed the gun, and had to be pulled out to clear the jam.* 2 instead of 1 nail were shot into the wood at the same time; the pair did not fully seat.* Single nails did shoot, but did not fully seat.Notes;* The galvanized nails that came with the gun still work fine.* The pressure was correct.* After any problem, the gun was inspected and any stray nails were removed. (This DeWalt 2" nailer has a flip up cover that can be used to look into the throat of the nailer and see any stray or jammed nails.)* I did not use the 3/4" brads (no gun), though they don't have the extra glue like the 2" brads do, so I suspect they are fine.I am ordering another brand and can not recommend this company's or any repackaged clone of what they sell. It was just pure luck that I didn't get the same sloppy glue on the 1-1/4" brads.
Juan C.
2024-12-23 19:07:26
Funcionan perfectamente con mi clavadora
Francisco Castillo
2024-12-14 11:10:21
cumplió mis expectativas
Recommended Products
$16.17
$ 7 .99 $7.99