Your cart is empty.
Your cart is empty. Replaces Models: 3618, 7443, 307443, 307408, 90719.. One Touch Cleaning System Kit, for Weber 90992 18.5".
Include: 3 Damper Blades, Damper Control Rod, H-Drive Assembly, Thumb Screw And Washer. 18-1/2-Inch One-Touch Cleaning System Kit: Comaptible With Weber Charcoal Grill/Kettle Grills, Replacement for 18-1/2 one-touch charcoal grill cleaning pieces. Used on the inside bottom of a for Weber charcoal grill as a cleaning device.
Used as a cleaning system: install this on the bottom of weber charcoal grill. Rotate the handle to close the window and stop the fire. The kit is compatible for rotating within a maximum 18.5 inch kettle to sweep the ashes and dusts to the dust collector on the bottom.
Used as a ventilation system: thanks to the one touch cleaning mechanism, this kit can be used to ventilate your charcoal grill. Simply move it to the desired position to control the intake of oxygen and regulate the heat level to your need.
One-Touch Cleaning System Kit: Fits 18.5"-inch one-touch silver. Built for One-Touch charcoal grills. Install on the inside bottom of a Weber charcoal grill as a cleaning mechanism. Easy to use the handle allows the blades to rotate inside of a 18.5" Weber Kettle, sweeping the ashes and debris into the ash catcher on the bottom of the kettle.
.
Compatibility: Size fits, easy to install, best grill replacement parts for 18.5" kettle grills (Weber Original Kettle 47cm & Original Kettle Premium 57cm), including Weber 18.5" Original Kettle, Performer Series and Master Touch Series. ▲It isn't recommended to use it on other models (18.5"Smokey Mountain Cooker, 18" grills or pre-2000 Performer models ect.), as this won't have a good surface match, there would be a gap that would not seal the air from entering and would not clean the ashes very well.
.
Control Air Flow: The ash catcher for weber can works as a cleaning mechanism as well as a ventilation system. Install the blades at the three vents on the bottom of the kettle, you can control more or less oxygen to reach the charcoal to adjust the heat of the kettle by moving the handle back and forth. Once you move the handle to completely seal the vents, the charcoal fire will go out, and then move the handle again to quickly remove the ashes from the bottom of the grill.
Note: When replacing a new one-touch cleaning kit, you need to remove the old and damaged cleaning kit first, and clean the inside of the charcoal grill or kettle grill at the same time, which will be much easier to install. When installing, avoid scratching your hands, it is recommended to wear safety gloves.
Gbrent39
2025-08-27 11:11:18
These replacement vent covers were a pefect fit and made a hug diffrence to the air flow needed to control the temper of my Weber Gill. The original had rusted and I has some difficulty finding the correct size. The quality is pretty and instulation was pretty simple.
Shea's Place 808
2025-08-21 13:07:16
Don’t know why I waited so long to replace mines. Was very simple to change out.
Richard
2025-01-20 16:36:20
Fit my Webber grill perfectly
John
2025-01-19 17:35:14
Great replacement part for my Weber 18 in he Grill.
Recommended Products
