Your cart is empty.
Your cart is empty.Internal Size for 2 Gallon Vacuum Chamber: 8.7"(Length) x 6.3"(Width)x8.3"(Height).
Frosti
June 12, 2025
The good: well packaged, seems substantialThe bad: no directions - the nut goes on the inside of the 'pot' but does one of the washers? Pretty sure it did but 1 sheet of paper for directions is not too much for a $100+ item.... Gauge parts look standard but seal part number should be provided for replacement. The fitting on the end of the hose that fastens to the vacuum pump should be like others - able to spin on without turning the hose, guage, lid....Something to note - either the gauges should have a button to reset the needle to zero or the following issue should be noted. We're only at 3800' and on our first 2 vacuum chambers the needle never goes down to zero because we're already at a lower atmospheric pressure.
GF
April 25, 2025
Very nice. Works as expected. Apparently no ability to order new seals (lid and fitting washers). I would give 5 stars if spare parts can be ordered.
Dmitry
April 7, 2025
A silicon gasket on a lid had a crack. I also has an extremely strong chemical odor. The item can't be stored in a living area because of the odor.
Robert Dorrell
March 7, 2025
Vacuum Limited to less than
Mark & Trishia Kohnen
December 25, 2024
rubber gasket at the top does not seal on the acrylic. Will not pull a vacuum. If you beat on the top with the pump running, it will start to pull down. But, not every time. Try looking up the manufacturer, you will not find one. If someone knows how to order a new red gasket for the top, please let me know. It seems like each page on Amazon that shows this item has a different manufacturer that does not exist. Sad.
E V.
December 6, 2024
Looks like it will work fine for us
Recommended Products