Your cart is empty.
Your cart is empty.Customer
2025-08-20 18:18:31
These gadgets works well for me.The suction power is awesome.Car dents can be perfectly repaired as long as you follow the steps exactly:“Dent remover tool for car must be used on clean,smooth,flat,non-porous,dry surfaces. Make sure there is good suction before lifting. When dealing with car dent,please ensure the dent is on a flat surface and the diameter should be large than the diameter of the bottom of the suction cup. Before using the suction cup, pour hot water on the dent area. After that, quickly place the suction cup on the dent of the car, and then pull it out horizontally. "The above operations focus on the following points:1. The dent must be on a flat surface and not in a curved position, because the suction cup of the repairer can only be used for flat surfaces;2. Before use, 100 degrees of hot water must be poured on the corresponding dents. I guess it should be the principle of thermal expansion and cold contraction, so that the operation can make the puller play the biggest role, and it is more labor-saving;3. Before the puller absorbs, the dust, water and other things that adhere to the surface of the dent must be wiped off, so that the suction can be maximized;4. Large dents may not be fully repaired in one times, and need to be repeated over and over again until the dent was fully repaired, but it's worth it.Notice:The puller core for small dents is non-metal, so it cannot be used on large dents, otherwise it will easily break, so you need to be careful when using it; the large puller core is metal, very strong, and has greater suction! A small dent puller has saved me a lot of money on car repairs and I would definitely recommend this great little tool to all car owners around me! awesome!
Rob
2025-07-22 16:18:04
It didn't work and was very bad quality. Dents were unable to be removed. Suction is not enough.
Ian Nikko
2025-06-14 16:30:12
Bought this to try to pull out a smallish dent (about 4 in x 2 in). The suction of the plungers work well on a flat surface, but it would not grip on my particular dent.
J. May
2025-05-19 11:52:01
This didn’t get the job done that I needed done. The larger cup couldn’t get a grip and the smaller cup wasn’t strong enough to pull the dent out.
cody b
2025-03-06 16:47:20
decent product will work for easy small dents, don’t expect to get anything major or big out with these
Marshall Williams
2025-01-30 14:29:31
Exactly what I needed for my dents
Josie
2025-01-08 10:18:25
Item doesn’t work at all. Followed the directions and the suction cup doesn’t even suction to the car.
M.M.
2024-11-26 14:33:01
For so little money I have popped out big dents, as long as they aren't on a seam.
Recommended Products