Your cart is empty.
Your cart is empty.Product Description
2/4 Qrity Cabinet Cupborad Furniture Door Lift Stay Support Hinge Damper - Support Up to 20KG - Opening Angle 75°/90°/110° with Hex Key
Qrity lid support hinges are made of high-quality zinc alloy materials and surface chromed, which is not easy to rust, strong and sturdy.
To freedom your hands.
Easy to use.
Widely used at furniture door, kitchen cabinet door, cupboard door, wooden storage boxes and so on.
Surface: bright chrome
The surface of the hinge is bright and uniform in color, and it is easy to clean the dust
High-density alloy material, we do every detail well
All accessories
Lid Support Hinges Screws Hex Keys
Adjustable tension:
Adjust tension with allen wrench to fit for lids with different weight.
After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut.
Easy to install:
The lid stay hinge can be used for right or left hand mounting.
The door opening angle can be adjusted at the maximum 75°, 90° and 110° positions.
New Version - Bidirectional Operation:
There are two ways to install, you can install the hinge to turn up or trun down the door of the cabinet.
If you want to open the door of the cabinet down, then you need to adjust the hinge direction as the photo, then the direction will change.
New Version - Multifunction: Suitable for drop lids or flaps of furniture, kitchen cabinet, cupboard,wooden storage boxes or toy box.
Joe H
2025-07-14 11:05:19
Works great, but installation instructions only have millimeter dimensions; it would help to also show inches. Easy to convert, however, using Google.
jerseyred
2025-06-27 10:17:30
We have a travel trailer with a full length cabinet over the bed with three doors that open upward. There was no mechanism installed that kept those doors open so you had to use one hand to open and hold the door up and open and use the other hand to get whatever you needed. A real hassle. These solved that problem beautifully!! Easy to install - took less than half an hour to do all three doors - holds the doors open and a breeze to close. Highly recommend these!!
Dan C.
2025-06-07 17:27:26
Worked great for camper cabinets
Kurt Szabo
2025-05-06 18:45:16
My built in hamper door hinge gave out after 30 years, I looked for a simular replacement several times but I couldn't find one. Finally I was painting the bathroom and decided to go at it more seriously. This item gave me the solution. The door hinges on the bottom. This item gives it a slow open and hard stop feature. I first put a normal hinge on the lower part of the door to the cabinet. This thing stops the door from opening hard and maybe breaking things. The device doesn't come with great instructions but I think anybody could figure it out with a bit of thinking and the pictures they include. One point, the pictures for the new design are wrong, one of the brackets is what I would call strait and one has a 90 bend, which is like the assembly picture shows not the parts spread out pictures. The hinge had to be reversed to work opening down like it does. Most hinges can't be reversed like this. I'm including a picture of my installation which might help somebody.
Hikari
2025-04-29 14:46:51
Description is inaccurate. Put two if these on a small coffee table lid. It holds the lid open but it is not soft close. Lid just slams down. Also very poor build quality. One has a ton of wobbles in the joint while the other is fairly rigid. Both are adjusted to the max stiffness
The Prof
2025-04-07 11:44:44
There are a few important points about how this item can be used, but first let me say that I was able to make these items work, but if they had been high-quality, precision made parts, things might have been a bit easier. I wanted a soft-close on a desk for my kid. I originally bought the Sugatsune knuckle-style lid-stay that I've successfully used before on toy boxes, but found that the knuckle hit the bottom of this shallow ( 3 1/2 inch deep) desk compartment. Because both arms on this item are approximately the same length, I was pretty sure I could configure it to fold evenly, which I was eventually able to do.The configuration provided in the measured drawings in the rather skimpy instructions does requires a depth of compartment of approximately 5 inches. By moving the container-side attachment point about 1 1/2 inches down (away from the opening) and 3/4 inches toward the lid hinge, I was able to get it to fold more evenly, so clearance into the depth of the compartment was not an issue.According to the included lid-weight chart, my lid is well within the adjustment range of a single stay, but I found that once I installed one on the right-hand side, the lid slowly closed to about 40 degrees and then dropped without much resistance, even with the friction adjustment at full. So I mirrored the installation on the left-hand side and the lid was pretty hard to close, but no longer dropped hard. So then I removed the right-hand side, and lo and behold, the lid still closed slowly. The loss of resistance was just a bit of a defect in the one stay. It would have worked if I just wanted something to keep the lid open and not control its descent.This all jives with my impression of this hardware from when I first handled it. It's heavy duty and strong enough, but it doesn't feel precision made. It rattles a lot. I will probably not buy this lid-stay again, instead paying about double for the knuckle-type, just because those seems to be made to high tolerances and are nicer to work with. That said, this set of lid stays did work for me and I'm not worried they are going to break under the strain of kids playing with them.
Carmen D Perez
2025-03-31 14:26:38
My trash can bin came with flimsy hinges that would get stuck every time I would change the garbage bag because I had to open the door all the way. So I decided to buy these. Best decision ever. Very easy to install and best of all you can tighten or loosen the hinge. Problem solved. The hinge is very sturdy, very well made, an all around great buy.
E.G.
2025-03-20 15:02:17
Works great for my DIY build in kitchen bench cabinets.
montenegro
2025-02-27 12:37:20
Me han funcionado perfectamente lo he puesto para un bajo sofá cama dejando un cajón con puerta elevadora debajo del mismo
Dan
2025-01-30 15:09:02
Works as intended to stop cabinet door from swinging open and touching nearby mirror
Customer
2025-01-15 11:59:51
We're really happy with these as the gas ones we were using kept breaking due to our cupboard doors being quite heavy.
gilles0502
2024-12-08 18:07:24
j'ai remplacé les ancienne par celles çi et c'est parfaitelle se monte facilement et de qualitémerci
Michael Adel
2024-12-07 11:59:54
not the perfect material as I was expecting.... but it is ok in reference to its price.
Recommended Products
$29.99
$ 14 .99 $14.99