Your cart is empty.
Your cart is empty.
2 Pack feeler gauges:
Made of 65 manganese steel, the measuring feeler gauge has 32 blades thickness and 16 blades thickness; Foldable, easy and convenient to take and store.
The space measuring tool is flexible so it is easy to get into hard to reach places.
The bundle of blades are able to be kept together so you can quickly pick the gauge you need or you can unscrew the finger nut and take the feeler out that you need to use so you do not have to wield the whole set.
Different units of measuring:
Dual marked metric and imperial, 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm, the numbers of size are etched into feeler gauge for easy identification.
Easy to use:
The blade protector has a thumb notch to aid in removal of blades, easy to use.
Wide application:
They can slide in and make the measurement easily and quickly; Be applied for many different things, such as setting lifter, sparking plug, points space and so on.
Specifications:
Measuring range: 0.0015 inch/ 0.04 mm to 0.035 inch/ 0.88 mm, 0.0015 inch/ 0.04 mm to 0.02 inch/ 0.508 mm
Material: 65 manganese steel
Blades: 32 pieces, 16 pieces
Package includes:
2 x Feeler gauges
Warm notice:
There is some anti-rust oil on the stainless steel feeler gauge to prevent it from rusty, please don't worry about that.
James H
2025-09-03 13:20:13
Good value for a precision set of tools
Louis Steenhagen
2025-08-31 13:59:16
Good quality, should serve me till the end of my days.
Vladimir Vinokurov
2025-08-21 16:46:17
Good gauges set, work well.
John
2025-07-13 10:02:37
The numbers printed on the feeder gauges wear off almost immediately when using, which makes it impossible to use again and again, you get what you pay for so beware
JOSE LOPEZ
2025-03-08 12:06:38
Quality
Happy customer
2025-02-28 17:15:32
Great feeler guages
Geared62
2025-02-04 14:19:03
Nowadays, most cars are designed under the metric system. Yet, feeler gauges are usually set up using the US/imperial system, which means that you’ll see sequential thickness in inches. The result is they jump quite a bit on the metric side. I have a vehicle requiring a check from .12 to .18mm on one side and .34 to .41mm on the other. I end up with 3 shims at the most that fit within these ranges. I bought these as often times, there are only two shims that would work in these ranges. I would rather pay more for what I need than end up with a limited range. I figure I’d stand more chances on these sets since there are two, but no such luck.In the end, regardless of the comments above, they come in little plastic sleeves. They cute, but totally useless. The only thing they are good for is to keep all the parts together. In both cases, the nut was not installed on the screw so they were all loose, but together. Otherwise, these sleeves don’t last. They are made of a very thin, low grade plastic and as I’ve experienced before they will degrade quite quickly. In the end they’ll end up in the trash anyway. They’re only good for shipping, and keeping them oiled.
BON
2025-01-20 15:14:26
The product seems to be made of quality materials. Had all the measurement blades described in the description. Laser engraved measurement markings were easy to read. It came perfectly dry (NOT oily) with no signs of rust. I will be using the tool to adjust engine valve lash. If the tool proves accurate, I would definitely recommend this purchase. Was exactly as hoped.
Recommended Products
