Your cart is empty.
Your cart is empty.Product Description
Sean Lambert
2025-08-18 18:18:31
These are pretty straightforward trolley wheels, and they roll fine in strut channel. I didn't stress them too much, but the center plate is super beefy.
Bryan Barnard
2025-08-07 10:41:19
The quality and finish on these are excellent, dimensions are slightly off on plate thickness, .223 inch instead of .25 inch., (5.66mm), the hole is just under 9/16 and 14mm (.55 inch or 35/64, and 13.97mm).The packaging with these is perfect & well executed.Test fitting these in standard 1-5/8 inch strut shows that they fit perfectly. I'd order these again and recommend them.
Derek Bruce
2025-07-19 10:25:02
If you weren't aware, you will need channel hangers for these. There will be no room for any significant bolts or way to secure the channel these are designed for. I don't understand the reviews about their quality when none of the ones I read had been installed...LOUD - These are loud when rolling, but not because of the rollers, just the channel itself, so as nice as the bearings are, don't expect quiet, roller skating noise, it will be loud. That being said, they support a lot of weight. I am using them to easily move 65-lb buckets with self leveling underlayment across my basement from the mixing area.HEAVY DUTY - Yes, these are very solid and do make rolling heavy loads easy to transport.CHANNEL HANGERS REQUIRED - If you want to securely mount the channel to use these in, there is barely any room once set in place, so you will need to get hangers.
Bill
2025-05-06 10:01:15
This 2-pack of silver 2-wheel trolley assembly rollers are for 1-5/8" wide strut channels. The dimensions match those called out, with rounding. The wheels roll smoothly and independently of each other. These are solid and strong, and I have no issues with them as they function exactly as they should.
Joe B.
2025-03-23 12:39:53
I bought these 2 Wheel Trolley Assembly Rollers for a DIY trolley system I’m building in my workshop to raise and lower tools and storage items between floors. These rollers fit perfectly in the 1-5/8" strut channel and glide smoothly. My challenge now is the steel beams in the ceiling aren’t in the right places, so I’ve decided to suspend the strut channel with cables. What could go wrong? These rollers are sturdy enough that I have no worries about their performance. The suspension cable is another question.
Baron 615
2025-02-17 10:29:20
Man are these things solid. They have a good heavy feel to them and move freely. They don't rotate like skate wheel for minutes on end and that is likely because the bearing is made for weight and not for speed. They roll with little noise but are very heavy duty.
Bill
2025-02-03 09:03:43
These EASGIU 2 Wheel Swivel Trolley Assembly Rollers are an inexpensive roller assembly for an ceiling mounted Unistrut track system. The stated load capacity is confusing because it gives different load capacities (150 to 280 pounds) to different RPMs of the bearings. How are you going to measure that. The ad also says the maximum load capacity is 1800 pounds. I would used around 150 pound loads max. and make sure that the attachment system for the Unistrut will support any loads that you may use. The rollers are well designed. The roller trolleys almost completely fill the cavity in the Unistrut so the hangers that hold the strut must be on the outside like Channel Trolley Track Hanger Brackets to support the Unistrut. You have to use the 1 5/8" or deeper strut for the rollers to fit inside. The trolley works well to move heavy objects across the garage.
S./G. B.
2025-01-11 14:32:57
These strut rollers are perfect for the walk-in cooler I'm planning on constructing. We will be hanging our meat (deer, pork, lamb, etc.) without blocking access to shelving situated behind those carcasses.
Recommended Products
$47.99
$ 22 .99 $22.99