Your cart is empty.
Your cart is empty.Product Description
Transfer to nail
Transfer to ceramics,wood and most various types of solid materials
Transfer to glass
Step 1
Printout the picture according to the
photo parameters;
the mirror side is the printing surface.
Step 2
Dry the ink by nature or by hair drier.
Step 3
Spray the gloss oil on the
pattern surface uniformly.
Step 4
Dry the gloss oil by nature or by
hair drier.
Step 5
Cut it along the periphery by
1mm from the pattern.
Step 6
Socak it in water for about 30-60
seconds,then slide the coating and
paper adequately by nature.
Step 7
Spread the base paper slowly to make
the transfer printing coating stick to
the product surface.
Step 8
Damp and soft the alabaster
paper,discharge the bubble
and water in the film sufficiently,
and then dry the surface by
absorbent paper.
Step 9
Bake it in the oven for 10-15 minutes
at the temperature of 212-230℉
(100-110℃)，or dry it by nature
for 1-3 days.
ME
August 24, 2025
Love these. I was able to make water slide decals for 4x4" tiles to use as a backsplash and match the existing tiles no longer made!!! Sealed with many layers of polyurethane spray! You must use very thin coats before applying it and doing the water part as it will cause it to crack if you put too thick of coats. I know this well. Lesson learned was my first time. Also have a can of air nearby as you don't want any fuzz or anything on them before you spray them and seal them after the printed and in between coats.
kevin lehew
July 21, 2025
Very easy to use. I used these to make logos for a collection of cups i am making for myself. I cut these using my silhoutte cameo3. Best advice i can give is, plan what you are making and try to put as many on one sheet as possible. Apply the clear coat first before cutting your work out. Becuase the clear coat will seal the edges and make it difficult for the transfer to release from the paper. (I hope that made sense). On mine, once i applied my decal to the cup. I let it dry and then used a 2k automotive clear coat to seal the logo and paint.
Nicole
July 10, 2025
I use these to make tumblers, I print the image let it dry for 15 min then spray a thin coat of triple thick spray on it. I let it rest for 15 minutes then repeat a total of 3 coats. It holds up great when going onto the cup. I’ve only had an issue with it tearing once. But I’ll still continue to buy this waterslide brand.
Kathy leyva
June 23, 2025
I love the paper but I did have alittle trouble with cracking but I still love it and will buy it again
Ami Arthur
May 29, 2025
I have used this product so much! It is a great value, works wonderful and shipping is fast. I have only had 1 issue with the paper not working like it should, it was quickly solved and my new pack was shipped right away! I highly recommend this product!
angkal
May 28, 2025
These are a bit pricey for what you get. If they would put better instructions in would be more helpful. When you buy these you are buying for a inkjet printer. They need to be sealed before using. Would be nice if they gave you suggestions on what to seal with. Your not getting very many sheet for the amount of money that you are spending. When you seem to waste 3 to 4 sheets trying to figure out the steps that you need to use to seal. They make it look so easy to come off...it takes more to get it to come off like they should. Better instructions would sure help. Still think that the price is a litter high for what you get when you waste at least 2 to 3 sheets just trying to get them to work. I still haven't got them to work as easy as they show, yet to get a good one that I can use.
jdnyc
May 24, 2025
Great decal paper! Printed better than other decal papers in my HP printer. Dried ink with a hair dryer and I was able to clear coat it almost immediately without any smudging. ( I used Krylon gloss clear) It came off the paper easily after dipping in water and I was able to apply it and reposition it a bit before it stuck cleanly to the surface. This paper saved the day on a rush work project!
Julie
March 19, 2025
Plan for slight fading once the project is baked and allow for the time it takes to spray seal at least twice. This water slide paper gave my project a more professional look. TIP: I found it best to spray seal BEFORE cutting my piece out. If I cut then sprayed my image didn't slide onto my project as easily.
NaN tay
January 1, 2025
These are easy to use, but recommend spraying Plasti Dip a few times to prevent tearing.
Paul Jones
November 18, 2024
Great product, excellent price and it works great.
Recommended Products