Your cart is empty.
Your cart is empty.Product Description
motorhead
2025-09-04 11:02:51
Good lag screws with washers. The driver socket was a nice plus. Stainless steel so they won't rust.
My Opinion
2025-09-01 17:46:14
Needed some lag bolts to attach some L brackets to quite a few 6' x 6' posts so they don't move from the ground. These are quality, solid, and I'm confident they will hold just fine. Even came with the bit for the head which I always appreciate. Highly recommend.
FunLuvr
2025-08-09 18:50:36
I used these 1/4" x 2" stainless steel lag screws to attach an outdoor television stand to 4x4 posts, and they performed exactly as they should. I drove them in with my M12 impact driver, which has been known to snap the heads off lesser lag screws when going into dense 4x4s, but these held up just fine. They bit into the wood cleanly and drove in smoothly without any issues. The included washers were a good fit and helped distribute the load. The 304 stainless steel construction should hold up well in outdoor conditions. Solid choice for wood applications, and I'd use them again.
R. Hoffmann
2025-08-06 15:12:28
These look vary strong and good. One thing I find is the threads are just the same diameter as the shank -- which means you have to drill separate holes for the thread parts and the shank part. The threads are not very deep, so they appear to be good for hardwood and may not hold well in softwood.
Fan
2025-06-02 18:36:58
I haven't had a chance to use these EASTPUK 1/4" x 2" Hex Head Lag Screws yet, but I am impressed with the quality and the packaging so far. The set includes 20 bolts, which seems like a great value for the price. The threads look solid, and the hex head design should make it easy to tighten them with a wrench or socket. The 1/4" size should work well for various projects. I will update my review once I've had the opportunity to put them to use, but based on first impressions, I believe these will perform well.
Milo
2025-05-25 14:26:39
I needed these lag screws to attach a large vise to a work bench that I put in the garage. The frame of the workbench is made by four by fours and so to get through the base of that large vice, go through the workbench top, and then go through the 4 by 4 they needed to be this long. Naturally I had to pre drill a pilot hole for them and they were still tight going in but I didn't experience any issues with them. They came in a little plastic case and they even included some washers, although that really wasn't necessary for me - I have lots of those. They included a screwdriver bit to help drive them in case you didn't have one on hand. It's a good solution and it is exactly what I needed. I'm glad that they had eight of these because that allowed me to attach other things as well if they need to pass through that 4 by 4.
Kealolo
2025-05-19 14:31:28
Ah! Beautiful stainless lags in a neat plastic box, with washers AND with a dedicated impact bit!!! That last is what sets this product apart.Because face it, unless you’re a masochist with an adjustable wrench, or a person with a power drill who doesn’t mind wrecking their wrists, driving lags this size takes an impact wrench, and who can find exactly the size of bit? Iakes shuffling through your wrench sets and then finding an impact adaptor, and then putting them back afterwards. I love that I can keep this impact hex bit WITH the screws.These screws will be used to reinforce the structure of a wooden deck I built onto a hillside for erosion control, but which is also a great place to sit in the breezes, where no such place existed before. These will be used to join 4x4 lumber in a serious way, and they should last well.These are nice lags, in a nice neat clip-shut plastic box, but the 5th star comes from throwing in the driver bit!Recommended!
Mack
2025-05-12 18:16:49
I always need lag bots for repair and projects. 1/4" x 2 1/2" stainless steel lag bolts are a popular size that I need frequently and these are of good quality and price. They even include a hex socket drill bit for your quick change drill.
motorhead
2025-05-08 09:23:04
Good lag screws with washers. The driver socket was a nice plus. Stainless steel so they won't rust.
My Opinion
2025-04-27 12:29:25
Needed some lag bolts to attach some L brackets to quite a few 6' x 6' posts so they don't move from the ground. These are quality, solid, and I'm confident they will hold just fine. Even came with the bit for the head which I always appreciate. Highly recommend.
FunLuvr
2025-04-07 18:03:13
I used these 1/4" x 2" stainless steel lag screws to attach an outdoor television stand to 4x4 posts, and they performed exactly as they should. I drove them in with my M12 impact driver, which has been known to snap the heads off lesser lag screws when going into dense 4x4s, but these held up just fine. They bit into the wood cleanly and drove in smoothly without any issues. The included washers were a good fit and helped distribute the load. The 304 stainless steel construction should hold up well in outdoor conditions. Solid choice for wood applications, and I'd use them again.
R. Hoffmann
2025-03-20 14:50:27
These look vary strong and good. One thing I find is the threads are just the same diameter as the shank -- which means you have to drill separate holes for the thread parts and the shank part. The threads are not very deep, so they appear to be good for hardwood and may not hold well in softwood.
Fan
2025-03-14 16:50:13
I haven't had a chance to use these EASTPUK 1/4" x 2" Hex Head Lag Screws yet, but I am impressed with the quality and the packaging so far. The set includes 20 bolts, which seems like a great value for the price. The threads look solid, and the hex head design should make it easy to tighten them with a wrench or socket. The 1/4" size should work well for various projects. I will update my review once I've had the opportunity to put them to use, but based on first impressions, I believe these will perform well.
Milo
2025-03-09 18:45:23
I needed these lag screws to attach a large vise to a work bench that I put in the garage. The frame of the workbench is made by four by fours and so to get through the base of that large vice, go through the workbench top, and then go through the 4 by 4 they needed to be this long. Naturally I had to pre drill a pilot hole for them and they were still tight going in but I didn't experience any issues with them. They came in a little plastic case and they even included some washers, although that really wasn't necessary for me - I have lots of those. They included a screwdriver bit to help drive them in case you didn't have one on hand. It's a good solution and it is exactly what I needed. I'm glad that they had eight of these because that allowed me to attach other things as well if they need to pass through that 4 by 4.
Kealolo
2025-02-09 13:36:34
Ah! Beautiful stainless lags in a neat plastic box, with washers AND with a dedicated impact bit!!! That last is what sets this product apart.Because face it, unless you’re a masochist with an adjustable wrench, or a person with a power drill who doesn’t mind wrecking their wrists, driving lags this size takes an impact wrench, and who can find exactly the size of bit? Iakes shuffling through your wrench sets and then finding an impact adaptor, and then putting them back afterwards. I love that I can keep this impact hex bit WITH the screws.These screws will be used to reinforce the structure of a wooden deck I built onto a hillside for erosion control, but which is also a great place to sit in the breezes, where no such place existed before. These will be used to join 4x4 lumber in a serious way, and they should last well.These are nice lags, in a nice neat clip-shut plastic box, but the 5th star comes from throwing in the driver bit!Recommended!
Mack
2025-02-04 17:18:08
I always need lag bots for repair and projects. 1/4" x 2 1/2" stainless steel lag bolts are a popular size that I need frequently and these are of good quality and price. They even include a hex socket drill bit for your quick change drill.
Recommended Products
$126.83
$ 57 .99 $57.99
$86.42
$ 41 .99 $41.99