Your cart is empty.
Your cart is empty. Standard type: European standard
Material: Carbon Steel
Type: Sliding nut
Types of: T nut
Surface processing: Nickel Plated
Weight: about 2g per nut
Size: Length 11mm, height 5mm, width 10.2mm, step width 6mm, step height 1mm
Uses: Suitable for Aluminum Extrusion Profile 2020 series Slot Groove 6mm
Feature:
Sliding nut can only be inserted into T slot from the end profile, so the assembly efficiency is not very good, but it owns the most excellent connection strength and reliability.
What is in the package:
24* T nut 2020 series M6
Steven H.
2025-08-04 18:12:14
Too small for my router, but they look like they would be great with quality.
Oldman
2025-06-15 16:12:33
After attempts to find the correct size T-Nut these were perfect. The frame channel was 3/8" wide and the 6mm T-nuts were about the right size to fit in the channel and locked in on an angle. Used M6-1.00 x 10 Pan bolts with a washer in front of the Channel and then a washer on the outside of the Cleat. The T-nut rotated with the combination of the lager washer it provided a very strong connection to the channel. I have two Cleats attached on the top of the frame. Was difficult to find hangers for the channel size. These were perfect. Will send a picture of the poster once attached to the wall. Cheers, steve
Arbi Amiri
2025-04-23 18:50:26
The headlines pretty much sums it up
scott tucker
2025-04-18 16:26:48
Good quality
Gman53
2025-03-12 17:59:24
I found it helpful when other purchasers confirmed that this T-nut fit Creality Ender 3 printers so I wanted to "pass it on" and let you know that this T-nut also fits Creality CR-6 SE and CR-6 MAX printers. I am using my T-nuts to build a filament holder for the top of my CR-6 MAX so I can reduce the already huge footprint of this printer.
Howard West
2025-01-13 12:00:39
Items arrived as advertised and in a timely manner.
M.C.C.
2025-01-10 15:22:07
These nuts achieved a glorious one star rating only because I was able to grind them down to fit so they were ultimately usable but, after the amount of removal I had to do, they really weren't the same product anymore.A slight misfit would almost be forgivable but these nuts were about 3mm too wide and about 2mm too tall to fit in standard 4040 extrusion channel. The actual geometric profile of the nut is also incorrect; even if the nut were sized correctly it still wouldn't fit. When it comes to 4040, these nuts are the equivalent of trying to fit a square peg in a round hole. These things are just garbage.I'll tell you what though: they are incredibly expensive so that's great.
Frank Zavala
2025-01-08 13:30:08
These 4040 M6 T nuts are perfect replacement or addition to the fanatec csl dd. Bought a used one with no hardware and these fit perfect. Super fast shipping as well.
Recommended Products
$12.99
$ 6 .99 $6.99