Shopping Cart

Your cart is empty.

Your cart is empty.

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

Free shipping on orders over $29.99

$9.99

$ 4 .99 $4.99

In Stock

About this item

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryers, vent, radiators, etc. to meet your needs in different applications
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange



Product Description

Hose Clamps

Qizpcer 25 Pcs 304 stainless steel adjustable worm gear hose clamps.

Specifications:

  • Quantity: 25 pieces
  • Material: 304 stainless steel
  • Size Range: 1/4-1/2 inch (6-12mm)
  • Product Type: worm gear hose clamps

Feature:

  • For sealing hoses against leaking.
  • Made of 304 stainless steel, corrosion-resistant, will not rust and break.
  • These hose clamps can be easily released or tightened the bolt by a screwdriver to adjust the band diameter range.
  • Widely used in securing hoses, pipe, fuel lines, automotive, duct, marine, etc.

Package Includes:

  • 25pcs x 1/4-1/2 inch (6-12mm)

Note:

  • Please check the specific dimensions of the product based on the second picture.
  • Measurement is the diameter of the hose clamp. Please measure the size of your pipe before purchasing it.
Hose Clamps
Hose Clamps

Customer
2025-08-27 16:20:14
Work great
G2_B
2025-08-16 18:57:52
good product.
Jonny Scott
2025-08-12 14:17:16
I needed inexpensive hose clamps to attach CPVC pipes to twenty kites to serve as handles for props for a musical so kids could wave the kites around. These worked fine. They are very inexpensive and will tighten very small relative to their rated diameter. HOWEVER, these hose clamps are NOT very strong and can be easily stripped out if tightened very much. (I stripped a few out working on my kites.) These worked GREAT for my needs, but if you need hose clamps for sealing a hose to a nozzle that needs to be tightened so that it is leak free, these hose clamps may not be stout enough.
D. Singletary
2025-07-25 10:58:32
i got these to snug up my Rabbitry Water Lines. i decided to use an RV Water Pressure regulator to supply them water instead of a gravity fed bucket with a float to help reduce risk of contamination.
Danny Stampley
2025-07-05 12:10:04
Item as described.
Gerald hartman
2025-06-07 13:40:02
I was hessident ordering from here on these but was pleasantly surprised that they are of good quality
Customer
2025-05-19 13:41:33
I purchased these stainless steel clamps due to a great price for a quantity of 25, just $9.95. I quickly discovered that they are not strong enough for a irrigation system. I broke several clamps when I tightened them up on a sprinkler system for a lawn. I tried using two clamps for each connection. They are simply not strong enough to tighten securely. The band width is about half of the needed to do the job.In fairness they are all stainless steel and would work for some light duty connections. I suggest not using them anywhere there would be constant pressure. Go with the heavy duty clamps (regular width ones).
pete
2025-05-17 10:48:29
Works as intended.
Dean Rottacker
2025-04-30 17:44:47
Ordered the size thinking 🤔 this what I needed to do the job. But it was the wrong size for what I needed, my fault. But I’m glad 😀 it was wrong. Got to find use fro them in something unexpected. All worked out well. Glad the mistake was in my favour.
Nelson
2025-04-26 15:24:08
Worked as expected.
Uncle Sith
2025-04-12 15:04:17
Just like advertising
Customer
2025-02-10 14:40:09
Clamps are of the poorest quality. Can not withstand any torque pressure. Literately none.
AS
2025-01-30 15:35:01
slightly smaller but they work.
Recommended Products

$46.12

$ 20 .99 $20.99

4.9
Select Option

$12.99

$ 6 .99 $6.99

4.7
Select Option