Your cart is empty.
Your cart is empty.Product Description
Michael Erchul
2025-09-03 14:57:38
I have a use for these that will allow them to be used both ways. I'll anchor something to a door and use either a sexbolt or these with a hurricane or sidewalk bolts. It works great and I don't need to worry about it z falling out.I like using these for so many different things.
Justin
2025-08-29 12:38:33
Showed up on time and in great condition.
Dave m
2025-08-14 13:56:01
3 out of 6 crush nuts failed from too much bolt to nut pressure. The Home Depo 1/4in x20 bolts snapped off because the nuts would not expand just twisted.. Applied lithium grease to threads then it worked much better without further failures.
Seva
2025-06-09 14:00:23
These were perfect for repairing broken, rusted out threads in my sewage basin. First, I tried using the rivnuts, but those failed to hold in plastic. Rivnuts seem to not have enough surface grip to work in plastic even if it's thick. These, on the other hand were the perfect solution. The only down side is that the ruvnut tool shank was too short to use with these. They are longer than ruvnuts before they are locked in, so instead I made a custom tool using a bolt, some nuts, and washers. That did the trick. Once locked in, these will not move. Lots of surface area to grip, so even in plastic with strong torque on the bolts, these did not spin once locked in. Strongly recommend.
15ironross
2025-05-01 14:19:28
I used this product to install seats in john boat, i wanted tall seats to aide in casting. These were the threaded insert i needed to anchor them to the thin aluminum seat material. The larger top flange and the even larger bottom flange , create a strong threaded support for the seat base.
Al C.
2025-04-25 17:46:10
No problems
Kep
2025-03-20 14:57:38
These crimp in easy as work as design. Not much to really say
Ladd H
2025-02-07 17:48:37
These have a great collar on them and very strong not cheap aluminum ones.
Recommended Products