Shopping Cart

Your cart is empty.

Your cart is empty.

2-Pack 3.94'' 15W LED Ceiling Fan Light Retrofit Kit, Ceiling Light Replacement Panel PCB 3CCT 3000K 4000K 6000K 1800LM 120V CRI90 (2-Pack 3CCT)

Free shipping on orders over $29.99

$21.98

$ 9 .99 $9.99

In Stock

1.Color:2-pack 3cct


About this item

  • Super Bright & Energy Saving - This led ceiling fan light retrofit kit with more than 1800 lm output and 80% energy saving and generate extremely low heat , 60 watt equivalent to the fluorescent light .
  • Easy Install - There are connectors including for simple wiring ,these LED's are NOT dimmable.
  • Smart Color Temperature Setting - Select the color by a quick switch. Once you get the color , let it stay for at least 6.5 seconds then turn off it. Do not turn on the light immediately after turning off the light, as it also takes 6.5 seconds to remember the color you selected. After 6.5 seconds or more you will find that it will be the color temperature you selected last time.
  • Safe & Comfortable - This led ceiling fan light retrofit kit is Lead-free, Mercury-free, No Flicker and No UV . and the light temperature is comfortable soft , You will feel relaxed.
  • Widely Application & Long Lifespan - Perfect for Ceiling Fan, Ceiling Light, Garage, Storage Area, Workbench, Basement, Home, Under Cabinet, Office, Hotel, School, Supermarket, Subway. Long lifespan 50000 hours , each day 8 hours lower maintenance costs. Extremely long life reduces re-lamp frequency.


We designed this 15w LED ceiling fan light retrofit kit for our North American customers, so that they can just simply
replace the "broken" bulb instead of having to replace the entire ceiling fan, thus saving them costs.
PLEASE NOTE : This LED ceiling fan light replacement kit NOT dimmable .
100mm / 3.94'' Ceiling Fan Light Retrofit Kit , Ceilling Light Retrofit Kit
15 watts
Outside Diameter: 100mm / 3.94inch
Lumen: 1800Lm for 100-150 Square Feet room
Input AC120V 50/60Hz
Light temperature : 6000K - 4000K - 3000K
Packing
2x led ceiling fan light retrofit panel with driver on the board.
2x Connector
6 x Big Magnets
Easy Installation
Step1. Cut off the power supply.
Step2. Remove the light source and BALLAST.
Step3. Choose one method suitable for your fixture.(with magnets or screws)
Step4. Connect wires, positive to positive and negative to negative.
Intelligent Color Temperature Setting
1)Select the color by a quick switch,the first time you turn on the light -white light ,the second time -warm light
,the third time - neutral light .
2) Once you get the color , let it stay for at least 6.5 seconds then turn off it. Do not turn on the light immediately after turning off the light, as it also takes 6.5 seconds to remember the color you selected. After 6.5 seconds or more you will find that it will be the color temperature you selected last time.
3)If you have more than two our lights and you need the same color temperature, you only need to quickly switch on
and off 7 times in 10 seconds, and then all the lights will synchronize a color temperature.


charlesb
2025-08-13 19:38:51
I bought this as a replacement for a ceiling fan where the original LED unit had been burned out due to lightning. This new unit worked well.
Diego
2025-08-04 17:31:50
Replaced burned out light, easy to install.
G. Forster
2025-07-30 14:45:27
Old ceiling light went bad. There are many types of replacements available, but I couldn't match one perfectly by the photos. This was as close as I could come. It was close enough and has been working fine.
J Wentz
2025-07-04 18:21:18
Fit very well in the ceiling fan, no modifications needed
daveNYC
2025-05-15 10:34:20
Bought these to replace stock LEDs in ceiling fans to upgrade from yellow light to bright white light. Easy to install - I just clipped the stock light off at the end to save the stock wiring harness connectors and used Waygo connectors to connect the harness end to the new disc.
Salvadormoreno
2025-04-08 11:47:16
Great quality, price , affordable,& we love it it's bright for any electric fan in your rooms or patio areas.
MDG
2025-03-04 12:19:33
Had to remove the wires and solder the old ones on. But after that it worked perfectly.
Raphaella Carvalho
2025-02-10 11:58:00
Low quality, burned in less than 60 days.No secret to installing.The fan still works without the light, the problem is in the light.
Recommended Products