Your cart is empty.
Your cart is empty. Electromagnet specification:
Type : Push Pull
Size:12* 20.5* 38.2 MM / 0.47" x 0.8" x 1.5"
Voltage: DC 5V~12V
Resistance: about 25 ohms
Cable length: about 90mm/3.54"
Stroke : 5mm
Weight: 13.5g/0.48 Ounce
Max. pulling force：40g
Power on test
6V Voltage:0.4A Current
9V Voltage :0.58A Current
12V Voltage:0.77A Current
Resistance value: about 14.7 ohms
6V: Small power
9V: Better power
12V:Best power
When the voltage is higher,will be more powerful, but also relatively easy to heat up, please decide the
working voltage according to your needs.
Note: Please don't power for a long time because the temperature rises quickly, it can
only be powered on for about 1 seconds.
Package Included:
2 x 5V~12V 25Ω Solenoid Electromagnet
Dave B.
2025-03-03 21:59:23
Keep them in the 9V-12V range, and they work great!
me
2025-02-17 16:02:52
to me the springs are a little light for my needs but was able to change a spring and it works as it should for my project
Magician and woodworker
2025-02-11 13:10:27
Works great with 12 volts, 8 AA batteries
AR
2024-12-21 13:41:22
They work as advertised. Beware that there is nothing holding the rod in after you turn it off so it does go flying a bit. Also, I found that it may need an external 5V and a transistor to run off of an Arduino. Works perfectly for my project.
Recommended Products
