Your cart is empty.
Your cart is empty.Product Description
Roger Garcia
2025-08-05 20:47:53
Pretty good logging shows pretty bright deff worth the money
Soccer 101
2025-07-11 13:40:57
I got these lights for off roading with my jeep. They are easy to install and super bright. They are good for late nights out and camping. They are durable and water proof too!
Gerard Debernardis
2025-04-30 16:59:32
These are OK. They’re not super bright. They’d be great as a accessory light, but don’t expect a tremendous amount of light out of these.
El
2025-04-22 10:35:52
I recently got a pair of the SJJGWW 3 Inch LED Offroad Lights for my vehicle, and they’ve proven to be a worthwhile addition, especially for nighttime trail adventures. I wanted something that could cut through the dark and illuminate objects in the distance, and these lights have been effective in that regard as I have bench tested them prior to installation and the light projected is decent for its 3inch size.The polycarbonate lenses used on these spotlights are a standout feature. The manufacturer claims that the lenses are impact-resistant and designed to withstand tough off-road conditions, and agree due to the properties of polycarbonate. One of my concerns with other off-road lights has been the lenses yellowing over time due to UV exposure, but these fog lights have polycarbonate lenses which should prevent discoloration.As for the beam pattern, these lights are focused spotlights, which means they cast a narrow, intense beam ideal for seeing far into the distance. I have uploaded an image that shows this beam pattern and I like the fact that it is not just a concentrated circle but more like oval which should cast wider down the road. On dark trails or rural roads, this concentrated wider beam helps identify obstacles or hazards well in advance, which is nice when off-road driving. They’re not the best choice if you need wide-area flood lighting, but they excel at lighting up distant points on your path.Installation was manageable, even though the kit doesn’t come with a wire harness. For anyone attempting to install these themselves, it’s important to set them up correctly to avoid electrical issues. I wired mine with an inline fuse and used a relay to manage the load safely. The switch only sends power to the relay to turn the circuit on, which helps protect against overloads. This setup isn’t too complex if you have some basic wiring knowledge, and there are plenty of online guides to help.For their price point, these off-road lights offer good performance. They may not have every premium feature found in more expensive options, but for basic off-road needs they performance well and are a practical choice. If you’re looking for budget-friendly lights that still get the job done without extra bells and whistles, these are worth considering. In case you want to simplify your installation, this wire harness kit requires no holes for the switch -https://www.amazon.com/Nilight-Connector-Harness-Light-2-Warranty/dp/B076C4MXR1/ which is nice but there are other alternatives to suit your install needs.
UJM81
2025-04-14 19:10:52
These due to size looked promising for under fairing lights on my motorcycle. However, when I got them, there were no instructions, so I put the brackets on the only way I saw they would fit. In doing this, you have to drop in the nut and then tighten it via the allen head screw. This works to a point and then the nut is pulled in and just spins. The area is so tight that you cant get a wrench on the nuts. The light would never stay level once mounted, so I didn't bother to test it against the others I've tried.The solution to this problem would be to do as other light makers do- put the bracket legs on the outside of the lamp body and then use a drilled & tapped hole for the screws.Additionally, the wire size is very small.
Rogue Smithers
2025-02-14 18:14:16
These are very bright but there is only 1 LED chip for all 3 bubble lenses. The mounting brackets and hardware install with ease but the nut on the backside is a little difficult to get a wrench on so be sure to tighten them before you do the final installation of the light on the vehicle. I'm planning to put these on my boat for when leaving from or returning to the boat launch when it's low light or dark conditions or when on a lake at night, which they should work perfectly for.For the price ya can't go wrong as long as you understand that you will need to buy a premade harness or build your own harness with power switch.
nubbles
2025-01-24 12:11:35
These are nice pods with a well defined concentrated spot and then one lens puts out some wide area flood. I have a few different variations of this same light, they are all identical except for the harness/wiring/mounting options. This kit comes with just basic brackets which are black instead of the usual silver, and no harness, just bare wires which is great for me as I like to do all my own wiring and switching my own way, and it reduces the cost of this kit quite a bit. Highly recommend.
RD Craig
2024-12-25 21:51:54
SJJGWW 3 Inch LED Offroad Lights. Well-built little lights.The quality of the lights is good. The machine work is well done and the finish work on the lights is well done. No switch or additional wiring comes with the lights but the mounting brackets do. The mounting brackets are okay but securing them on the light itself for me was a challenge. Tight area for installing the nuts on the back of the light made it a challenge to get them where I wanted them to sit. Other than that, the lights work and look good.
Recommended Products