Your cart is empty.
Your cart is empty.Product Description
Kent Lott
September 4, 2025
works great
Linda S.
August 23, 2025
Some don't tighten down enough
james
July 22, 2025
Work pretty good
Mike
July 13, 2025
Well these are inexpensive and you get what you pay for. The Good is there are three sizes for the price and they do hold taps which is what they are intended for. The Bad is the machining is poor becasue they probably crank out untold thousands of these per day, but the poor workmanship makes for very difficult tightening especially when you need to close them to the smallest diameter. The poor machining makes it very difficult to untighten. There are a lot of metal spurs and rough surfaces due to the cheap price.The chuck is poorly designed in that there are two "rings" of knurling which you must have to grip them. But the rings of knurling are indented so it makes them practically useless for gripping. The knurling needs to cover the entire surface of the chuck - not just two rings indented.The Ugly? It took me about an hour of my own time to work the metal and finishing such that they would work as well as possible. Buyer beware ...
E Michael Eacho
July 12, 2025
Great tools. Made tapping holes a lot easier.
Mitch
June 26, 2025
Came promptly and in excellent condition.
C K
June 5, 2025
Part defective , design bad, or description wrong. On arrival it would not grab anything as tines bent outward. After a little bending it could be made to work but still the smallest T handle will not grab 1/16 inch parts (1.57mm) as description claims. Smallest it will grab is around 7/64ths. Smallest one is totally useless. The two larger ones work but the screw action is very rough.
Daryl Cameron Null
May 20, 2025
A little stiff at first but they loosen up as you use them. Still securely holds taps. Would recommend.
Hayden
April 25, 2025
This thing is the stiffest taps I have seen in my life. Would absolute not recommend this to anyone
Customer
April 1, 2025
Excellent, priced accordingly
Roger
March 31, 2025
The smallest one was hard to tighten. I needed vice grips. Pretty good quality overall and price was right.
Chris
January 26, 2025
The threads are a little rough but besides that these are great.
Stephen A Rowland
January 19, 2025
You need to tighten the collet with a pair of pliers to get a proper grip on the tap. Especially with the smaller taps.
Recommended Products
$30.35
$ 12 .99 $12.99