Your cart is empty.
Your cart is empty.Product Description
This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. Lock washers are commonly used in any application using a bolt where two pieces are being drawn together.
From the Manufacturer
This split lock washer provides a circular bearing surface with offset split ends which help bite into the mating material to provide a locking feature when tightened beneath a nut. It is round with a hole in the center and can be used where loosening from corrosion or vibration is a concern. Lock washers are commonly used in any application using a bolt where two pieces are being drawn together.
Bill
August 5, 2025
I use these to assist with my weight lifting barbells. The little screw-on twist barbell ears like to twist off upon vibration or regular usage. These help prevent that. Not perfect, but they help. The price on these seems a bit high though.
mike gasiorowski
July 9, 2025
as expected
Bird
July 5, 2025
I tightened the nut down with a long handle but this 1" lock washer never flattened down to where both ends are side by side like a normal lock washer would under pressure. The pressure instead bent my equipment, which is less stiff than this super hard washer.
Bateman
February 27, 2025
Exactly as agreed!
Snorvelous Wubbins
December 18, 2024
This washer is a good quality. I needed a single washer for a barbell. The washer should have been thinner, but this one worked, despite being way too thick. Now I have a box of them that I'll never use.
Recommended Products
