Your cart is empty.
Your cart is empty.Rig Rite Manufacturing Marine 0.5"x 12" Horizontal Transducer Plate makes mounting transducer and paddle wheel simple and easy. It is a perfect mounting surface for installing, removing or adjusting transducers to get the maximum performance from your fish locator. It is made from light gray starboard marine grade polymer sheets.
Aaron
2025-08-20 15:43:51
It was what I expected it to be. Stiff quality plastic.I had to modify it for my particular boat. My boat curves inward across the transom so I had to heat up the mounting plate with a heat gun and mold it to the curvature of my boat. I also had to drill out and counter sink a third hole in the middle of the plate and add a third stainless steel screw, so I could get a tight fit to my curved fiberglass boat transom. If your transom is flat it will fit with no modifications. Overall I was pleased with the plate, no more drilling into the old boat when adding a new transducer.
Goran
2025-08-01 13:19:24
Have an 80s tracker boat and this worked fine to mount transducer on it. I change sonar brands quite often and this help me doing that with out have a lot of holes in the boat. I hear you can also use plastic siding from Local hardware store but this was cut and ready to use.
Costero
2025-06-14 15:30:05
Good product, good price. Note that the color is light grey, as stated in the item description -- not white as shown in the photo.It's large enough to mount 3 or 4 devices, and I need only 1 -- so I will cut it down to about 8", and use the 4" leftover to create a portable mount to put my fishfinder in one of the oarlocks on my small 14' boat. The material is very hard, dense plastic, and can be cut, drilled, and sanded pretty much like wood. If you're going to use it as-is, the 12" plate is pre-drilled, and stainless screws are supplied. However, if you're going to put it on a thin-hull aluminum boat like mine, you'll need to buy some stainless nuts and bolts, rather than use these long screws.
TexasWilly
2025-03-10 12:06:51
If your mounting transducers or fishing lights and you don't use this product, you are missing out. This product saves time and keeps you from drilling holes in your boat. Mounted a transducer and fishing light on my boat and only had to drill two holes for mounting the plate. the other 8 holes went into the plate. This product is great.
Hugora
2025-03-07 12:35:26
Easy to install & Great value for the money
Ronald
2025-01-14 09:11:14
This plastic "board" is 12" long so I cut it in two pieces, one for my aluminum Jon boat and one for my fiberglass bass boat. The board, which is for mounting a transducer for my fish finders, has two pre-driiled holes in it for mounting as a single piece, which I would have preferred no holes at all. I stuck it on the boats with a 3M Maine adhesive and we will see how long it stays on. I was able to cover existing holes from previous transducer mounts with this product. I definitely recommend this plate.
Tara
2025-01-07 21:25:33
Product is great, but didn't come with mounting screws that description says are provided. Would of ordered a different one that had screws that come with it instead of this one if I had known. Wanted to install it right when I received it but now I have to make a trip to the hardware store.
Scott
2024-11-30 15:49:16
Works great to illuminate extra holes in transom of boat....but beware the screws that it comes with aren't strong enough and will twist off making for sum panic time, so do yourself a favor and head on down to local hardware store and get some real stainless screws before u even start or suffer the twist off.......
Recommended Products
![Bronze Tilted Thru-Hull Transducer with Depth & Temperature [12° tilt] - Airmar B175L](images/loading.gif)
$1,238.75
$ 99 .00 $99.00
$204.02
$ 92 .99 $92.99