Your cart is empty.
Your cart is empty. About Auvotuis
Auvotuis is a dynamic brand with a professional and mature production process, offering you products of excellent quality and a new shopping experience with excellent service!
Specification
Color: Black
Material: Nylon
Height: 10mm/ 0.42inch
Total Length: 26mm/ 1.04inch
Package Includes
30Pcs x M6 Wing Nuts
Warm Tips
Please allow reasonable error due to manual measurement.
30-Day After-Sales Guarantee
We are always committed to providing our customers with a 100% satisfactory service experience.
If you have any quality problems within 30 days after you receive the goods, please contact us promptly and we will give you a satisfactory answer within 24 hours.
leri777
2025-07-20 10:23:36
These held up surprisingly well. When I first used them I was like wait these are plastic, these aren’t gonna do nuthing but break but they didn’t they have a slight flexión to them when tightening to max but they didn’t break or strip. So I’m happy with them
blh
2025-06-15 15:52:27
Tried first 3 and NOT ONE would thread onto a new stn stl bolt. Using mag glass threads were really boggered up. Looked at back side and threads were clean. I could run bolt into backside of TEN cleanly until the bolt got to the other end where, even being plastic, it would jam up. Experimented with one. Used heat to melt threads in place and it was better, but still would not start without trying to cross thread. BTW You can NOT run a tap into plastic threads as it won’t cut them right - a lot of experience with this. Beside my taps would not even start on EITHER END. What I found is the front threads are burred and malformed. Using a taper reamer I got a “starting taper†BUT THEN also had to cut off first thread and a half to get rid of the malformed thread. Second one just used the reamer and extremely sharp knife on the thread. All of them thread on pretty easy after that. If it doesn’t or especially keeps trying to cross thread, cut the one front thread back more. Because of the tight thread, they all have a minor locking characteristic which was what I needed as well as completely rust free.
Tim Gill
2025-01-26 11:13:37
Threads strip when trying to thread them on
Recommended Products
