Your cart is empty.
Your cart is empty.Product Description
About Secopad stickers
Each Seocpad strips can easily stick to the surface of bathtub using special glue. The upper surface comes with approximately hundreds tiny protrusions per piece to increase friction. At the same time, this design is meant to allow water to flow freely further reducing the chances of soapy water accumulating.
Why Use Secopad?
Our Secopad strips are designed to stick firmly on smooth surfaces (e.g. the soft PEVA material used for bathtubs) offering a strong adhesion and a great grip. This, further, provides you with a long-lasting slip and fall protection.
Characteristic
- PEVA material
- Special Glue
- No Smell
- Easy to Install
- Non Slip & Safe
- Comfortable
- Easy to Remove
- No Residue
Bathtub
Stairs
Bathroom
Swim pool
Ohua Morando
2025-08-29 13:03:48
It was very easy to work with and will help guard against slipping.
LaurieS
2025-08-11 15:01:52
These are perfect! Follow directions and make sure to use the tool provided to get bubble out when you apply them, and wait 24 hours to use tub. They have stayed in place and make the tub so much safer for my mom!
Robert Rydlund
2025-07-27 15:32:35
My tub has raised contours so these straight strips seemed to be the best way to go. They are easy to peel off the wrapper and apply. A plastic trowel is provided to help press. It's not great but it helps. You get a lot of strips and should not need to use half for 1 bathtub. Made a huge difference in stability. Very happy with the product.
KAC
2025-07-01 17:51:53
We have purchased these non slip strips a few times . They work great. Have good traction and stay put. Have to be changed out every few months for cleaning and then new ones put down. I would recommend this product .
LB
2025-06-29 17:17:36
these smelled strong right out of the package and I let them sit out for a couple of days... it didn't seem to make a difference with the odor... but, I decided to use them anyway... glad I did!I separated these and laid them out on the shower floor in the pattern that made the most sense to me to cover the entire floor. I peeled the backing off, which was pretty easy to do, and stuck them down. I used the little tool to ensure they didn't have air bubbles and the edges were firmly down...They can hardly be seen on the shower floor but have added so much security and stability to the shower experience... I have no worries of slipping and they do not poke at my tender feet... and the smell is gone after all...
_User
2025-06-11 15:15:41
Well, "eh" it's okay.I don't get the "leave it unused for 24 hours" direction ? for what? Who can leave a bath, shower not used for 24 hours? I can't - I only have the one.So, we left it for as long as we could "unused".They seem to stick okay, so far.I put a "hair dryer" - lightly, with distance, for a few minutes only to possibly ? warm them a bit more than usual ? to possibly effect the adhesion. I don't know that it did anything - but I did that.I scrubbed this "plastic" (or whatever it is) tub/shower well, then wipped with denature alcohol and dried it well - likely the hair dryer first too to make sure is dry-dry is something I'd do next time if there is a next time.If it lasts - ? - a year or more I'll consider it all as great! Until then, again, "eh" who knows.Again, it's a contact cement so don't see any need for the 24 hours and could be a "language" thing ? It'd be like duct-taping something and not using it immediately - why? For what reason? Waiting serves no purpose that they explain, e.g., don't use because... and for the purpose of... ? what?Otherwise for a normal size Tube - I used/required Eight Strips to what I feel is properly making a non-slip surface are when using as a shower and may need to, e.g., stand on one foot to wash the other, etc. or if standing on two feet while waiting for the water to safely rinse off the soap so you can move again and not feel unstable.So, so far so good and for now would continue to use the balance of them in the package if required in another spot.I hope that helps someone!
W. Landry
2025-05-29 17:57:56
Easy to install. Invisible after installation. One thing: separating strips is done by bending each strip and cutting film with a sharp knife. They do not pull apart without using a knife.
Carol
2025-04-15 16:45:57
They visually disappear. You can barely see them in the tub in the clear color. So you get the benefit of safety without the ugly look. I used 14 of the 36 pack. Very happy with these.When sticking them in the tub, One recommendation is when you’re applying them lay a flash light in the tub so that you can see where you’ve placed them, otherwise it’s very difficult to line them up the way you want to when you can’t see them. The flashlight worked great.
Ohua Morando
2025-04-14 18:55:59
It was very easy to work with and will help guard against slipping.
LaurieS
2025-04-06 12:54:36
These are perfect! Follow directions and make sure to use the tool provided to get bubble out when you apply them, and wait 24 hours to use tub. They have stayed in place and make the tub so much safer for my mom!
Robert Rydlund
2025-04-05 12:25:24
My tub has raised contours so these straight strips seemed to be the best way to go. They are easy to peel off the wrapper and apply. A plastic trowel is provided to help press. It's not great but it helps. You get a lot of strips and should not need to use half for 1 bathtub. Made a huge difference in stability. Very happy with the product.
KAC
2025-03-30 13:32:36
We have purchased these non slip strips a few times . They work great. Have good traction and stay put. Have to be changed out every few months for cleaning and then new ones put down. I would recommend this product .
LB
2025-03-02 10:52:40
these smelled strong right out of the package and I let them sit out for a couple of days... it didn't seem to make a difference with the odor... but, I decided to use them anyway... glad I did!I separated these and laid them out on the shower floor in the pattern that made the most sense to me to cover the entire floor. I peeled the backing off, which was pretty easy to do, and stuck them down. I used the little tool to ensure they didn't have air bubbles and the edges were firmly down...They can hardly be seen on the shower floor but have added so much security and stability to the shower experience... I have no worries of slipping and they do not poke at my tender feet... and the smell is gone after all...
_User
2025-02-22 11:38:10
Well, "eh" it's okay.I don't get the "leave it unused for 24 hours" direction ? for what? Who can leave a bath, shower not used for 24 hours? I can't - I only have the one.So, we left it for as long as we could "unused".They seem to stick okay, so far.I put a "hair dryer" - lightly, with distance, for a few minutes only to possibly ? warm them a bit more than usual ? to possibly effect the adhesion. I don't know that it did anything - but I did that.I scrubbed this "plastic" (or whatever it is) tub/shower well, then wipped with denature alcohol and dried it well - likely the hair dryer first too to make sure is dry-dry is something I'd do next time if there is a next time.If it lasts - ? - a year or more I'll consider it all as great! Until then, again, "eh" who knows.Again, it's a contact cement so don't see any need for the 24 hours and could be a "language" thing ? It'd be like duct-taping something and not using it immediately - why? For what reason? Waiting serves no purpose that they explain, e.g., don't use because... and for the purpose of... ? what?Otherwise for a normal size Tube - I used/required Eight Strips to what I feel is properly making a non-slip surface are when using as a shower and may need to, e.g., stand on one foot to wash the other, etc. or if standing on two feet while waiting for the water to safely rinse off the soap so you can move again and not feel unstable.So, so far so good and for now would continue to use the balance of them in the package if required in another spot.I hope that helps someone!
W. Landry
2025-01-07 10:02:22
Easy to install. Invisible after installation. One thing: separating strips is done by bending each strip and cutting film with a sharp knife. They do not pull apart without using a knife.
Carol
2025-01-04 13:00:32
They visually disappear. You can barely see them in the tub in the clear color. So you get the benefit of safety without the ugly look. I used 14 of the 36 pack. Very happy with these.When sticking them in the tub, One recommendation is when you’re applying them lay a flash light in the tub so that you can see where you’ve placed them, otherwise it’s very difficult to line them up the way you want to when you can’t see them. The flashlight worked great.
Recommended Products