Your cart is empty.
Your cart is empty.Sleeve inside diameter 3/4” Sleeve outside diameter 7/8" Sleeve length is about 3” Sleeve Keyway slot 3/16” Keystock Length is about 2”
J P.
August 21, 2025
I added a torque converter to my coleman ct200u and the shaft sizes are different so this converter was needed. It worked exactly as described.
Zygmunt Wawrzyniak
August 5, 2025
Hi quality ,recommended products.
Jake f.
July 14, 2025
Fits perfect
Customer
July 8, 2025
This is a nice Trapped Key design. Great for some applications, however it will not work with drivers that have a built in key or use a fixed extended key. This sleeve would be nice for a Pulley, Pressure washer pump or some device that uses a separate key. The sleeve and key fit the 3/4" shaft well, and it is made out of durable materials. All of my clutch drivers has been engineered with the integrated key, across the full length of the Clutch Hub, this version left me high and dry. I probably could have opened the ends of the adapter sleeve in a pinch, that wasn't necessary as I had time on this project so I ordered the correct adapter with the full length keyway.
Chris
June 28, 2025
No problems.
Customer
June 13, 2025
Worked like a charm. Fit the motor shaft and the pully. I would recommend buying again
Jim
June 2, 2025
The fit was exactly what I required
Cari T
May 26, 2025
This piece was not true to size and did not fit. The part required. Even after extensive research and sizing. I would not recommend or order again.
J P.
April 21, 2025
I added a torque converter to my coleman ct200u and the shaft sizes are different so this converter was needed. It worked exactly as described.
Zygmunt Wawrzyniak
April 13, 2025
Hi quality ,recommended products.
Jake f.
April 11, 2025
Fits perfect
Customer
February 14, 2025
This is a nice Trapped Key design. Great for some applications, however it will not work with drivers that have a built in key or use a fixed extended key. This sleeve would be nice for a Pulley, Pressure washer pump or some device that uses a separate key. The sleeve and key fit the 3/4" shaft well, and it is made out of durable materials. All of my clutch drivers has been engineered with the integrated key, across the full length of the Clutch Hub, this version left me high and dry. I probably could have opened the ends of the adapter sleeve in a pinch, that wasn't necessary as I had time on this project so I ordered the correct adapter with the full length keyway.
Chris
January 4, 2025
No problems.
Customer
December 31, 2024
Worked like a charm. Fit the motor shaft and the pully. I would recommend buying again
Jim
December 19, 2024
The fit was exactly what I required
Cari T
November 12, 2024
This piece was not true to size and did not fit. The part required. Even after extensive research and sizing. I would not recommend or order again.
Recommended Products
$24.92
$ 11 .99 $11.99