Your cart is empty.
Your cart is empty.
Dimensions: Parallel pressure surface spreading range 5.0-11.5 mm, driver: outer hexagon 17 mm. 2-piece prop sleeve tool in sizes 5.5 x 8 mm and 4.5 x 7 mm, drive: 1/2 inch; General pillar expansion tool, compatible with Volkswagen, Audi, BMW, Ford, Mini and other models.
Material: high hardness carbon steel material, fine workmanship, durable.
Function: The suspension tool is used to extend the suspension strut and remove the ball head, allowing you to easily separate the suspension strut from the wheel housing. The parallel double-ended design ensures that equal forces are applied when the struts are deployed, thereby minimizing the risk of damage and ensuring safe and reliable operation.
Tip: Before you buy, make sure this prop extension tool is the right size for your car. Do not use power or air tools to drive these strut expander tools to prevent damage caused by improper operation.
List: 3Pcs pillar expansion tools. If you have any questions, please feel free to contact us, we will respond quickly within 24 hours to solve the problem for you, so that you can buy at ease, with peace of mind.
jimmy
2025-03-25 13:16:47
had my doubts, but took it’s really useful to work with the struts, highly recommended .
Christian Nieves
2025-02-07 15:50:20
So easy to take out
Michael Turbyfill
2025-01-24 11:45:30
Acceptable quality. Performs intended function. Would recommend.
Trippy
2025-01-22 10:59:13
This stretch spreader tool has save me in a pinch. Instead of using crowbars and hammers to break tabs on strut mounts to get struts to drop down into place, this tool allows you to do it in a controlled environment and with precision. I've also found several other uses for this tool and it's a great addition to my toolbox. Doesn't take up a lot of room which is perfect for me as a mobile mechanic. Overall, very durable tool, made well, saves a lot of time and frustration. Definitely deserves a five star rating!
Andrew C
2025-01-17 11:34:59
The three strut spreaders have the following dimensions:Red one: minimum gap it'll fit in is 5mm. It will expand further than your heart desires.Short spreader: minimum gap it'll fit in is 5mm. It will spread the knuckle to 9mmLong spreader: minimum gap it'll fit in is 3/16" (just under 5mm). It will spread the knuckle to 1/4" (about 7mm)This will stop me from needing to jam a screwdriver/chisel/pry bar into the pinch bolt area if knuckles. I have definitely deformed Cobalt SS aluminum knuckles with that method and wish I knew about these tools in the past. All you need is a few mm's and the ball joint should fall out little help.
Recommended Products
