Your cart is empty.
Your cart is empty.Product Description
The Most Refined Curb Ramps You Can Buy
BRIDJIT Curb Ramps are a tested and proven product. We've put a lot of time into designing a curb ramp that will stand the test of time:
- Our ramps are heavy duty - we use a very dense, very durable material, and each section weighs about 50 pounds.
- We provide hardware to bolt all your ramp sections together. Once bolted together, our ramps stay put.
- Our ramps are tapered at each end. That way, when a delivery vehicle, trash truck, or other large vehicle drives down the street, they won't damage or move your ramps by driving across them.
- Our ramps have an integrated channel for water to flow underneath, so they don't block drainage.
Why BRIDJIT Curb Ramps?
The Smartest Curb Ramp Design You Can Buy
BRIDJIT Curb Ramps have been designed with every contingency in mind. Our ramps bolt together for stability and security, but our hardware allows for a little "give" so they can fit around a curve (like on a cul de sac). Our ramps have tapered ends so they're not damaged by delivery trucks. They feature an integrated water channel, so they don't block drainage. Because they're not bolted down to the curb, they can be temporarily flipped out of the way for street cleaning.
When it comes to design, we've got the smartest one.
Unsurpassed Durability
We manufacture our ramps from a very heavy, very dense mix of materials. We do this because we know the ramps are going to have to support the weight of every vehicle that drives across them - from large SUVs and motorhomes to big delivery vehicles and garbage trucks that will drive across the ramps longways. We also know our ramps are going to sit outside 24/7, and will experience extreme heat as well as bitter cold.
We Use Recycled Tires To Make Our Ramps
Every year, millions of tires are thrown away. At BRIDJIT, we're doing our part to put these discarded tires to good use.
We use crumb rubber from recycled tires to produce our ramps. While we like crumb rubber because it's very tough, it's also good to re-use rubber whenever possible. New rubber is easier to work with, but it's often harvested from trees that grow on plantations in the rain forest. Instead of displacing rain forest, we're recycling.
Our Ramps Are Made In The USA
BRIDJIT Curb Ramps are Made In The USA. Supporting US manufacturing and US workers is one of our corporate values. However, we also like to manufacturer our ramps in the USA because:
- We can ensure maximum quality
- We can reuse discarded tires from US consumers
- We don't have to ship heavy ramps halfway around the world, which would be wasteful
BRIDJIT Curb Ramps Are Expandable
A standard set of BRIDJIT Curb Ramps includes a left, right, and center section, and is about 12 feet across. Extra center sections are available, allowing you to expand your BRIDJIT Curb Ramps to the full width of your driveway.
chuck
2025-07-14 11:48:11
I bought these and they work great. To put them together watch their video first. Then stand on the panel you need to hammer the bolts into. This keeps it from moving away as you are hitting them into it. If you have a curve - not curb - leave some space between them. The video shows how to install the nuts, get a heavy duty screw driver to lift them up in order to put the bolts on. I didn’t mess with the threads because they are tight once you put them on.
Aaron Corder
2025-06-09 21:17:54
Worth the Price. Heavy Duty, Easy/ Quick Install. Have several low profile vehicles where these bridge the space gap between curved curb and driveway. Works very well on a road with an incline. You do not feel a bump as you drive into or back off the drive way. It’s stays on position. Like that there is a drain gap in middle of bridge. Highly recommend the Bridge it. Worth the additional cost above there competitors.
Boywonder
2025-04-30 11:37:37
1st off these are freaking heavy!! Make sure you put them next to where your going to assemble them or have a strong dude ready.2nd- they need to fix the slot where the bolts go threw as the bolt head gets hung up on channel. Just make it 1/4 in larger to fit the bolt head and make the rubber in the shape of the nut to hold it or again, make the channel larger as it was an issue to get the wrench over the nut as the wrench hit the material of the brijit.Works great I wish I had purchased another 1-2 pieces to cover the whole driveway but np.
Customer
2025-04-22 15:05:30
They function just like we expected them to. Installation is where I dinged this product slightly. The bolts used to fasten/join the pieces is more difficult than necessary and with too much tug or pull the threads strip.I’d suggest to designer's to go with a clamp system and charge a little more for additional cost in materials.
A. Rodriguez
2025-04-17 15:58:30
It's been 2.5 years and this thing has held up spectacularly under some hostile conditions. Yeah, it's expensive but it bakes under UV sunlight, is soaked in rain, survives in 110 F heat, doesn't gouge when I find it buried under snow with my snow shovel. And I drive 2 SUV's over it daily, no deformation. I said "safe" in the title because if you're backing your car into the driveway and it rests in that concrete curb-gutter, you have to rev the engine to get over that hump and suddenly you have this fully reved vehicle charging at your garage door or maybe small children. But with this ramp, just drive normally. No gas, this lets you just coast into your driveway slowly, nice and smooth. It's probably kinder to your suspension, too. This ramp has only one job - a very difficult job to do reliably - but it does it perfectly.
Madskilz
2025-04-01 16:30:30
UPS had to get two guys to unload it from their truck. They used a dolly and carted it into my garage. It came in 3 boxes which were taped and plastic wrapped together. Packaging wise, it was well packaged!Assembly of the product is extremely easy. Instruction states you need two people for assembly, but I managed to do it by myself. Flip all three pieces so the bottom is facing up. There are 4 bolts already secured under the center piece. I aligned the side pieces to each side of to the center piece. I stood on the side piece, and tapped the bolts thru. I then slid a 2X4 underneath the connecting pieces. Using a flat head screwdriver, I pry the threaded part of the bolt away from the rubber material to install the nut. You can easily thread the nut by hand, but I used a torque driver with a 19mm socket. Once all the nuts are installed, I flip the Bridjit over and position it in place.I tested it with my track car and the difference is night and day. I use to have to enter/exit my driveway diagonally to prevent scraping the bottom of my car. Now, the bump is gone, and the transition onto my driveway is smooth. I am highly impressed on the quality of the product, especially when it uses recycled rubber. I want to thank Amazon for carrying the product, as I was able to use my Amazon prime to get it shipped free.Highly recommend this product!
Larry G
2025-01-23 11:01:03
Product arrived earlier then expected in three boxes, each weighing over 40#. When I tried to connect them, the holes did not match up. I had to replace the supplied 1/2" bolts with 3/8" bolts to get them connected. Even using the suggested trick of sliding a board under the joint, it was impossible to get a wrench on the nuts, so I had to settle for finger-tightening them. They should have been designed so they just lock together without any hardware, like a puzzle. When I wrestled them down, they work as advertised. They are very heavy duty.
JM
2025-01-09 18:50:10
Durable and does not move. Just what I needed. No more scraping pulling in and out of the driveway. Be careful when measuring your driveway and knowing how much coverage you want. I may have measured incorrectly or calculated the dimensions wrong, so I might order an expander. However they make a world of difference as they are now !!!!! A GREAT investment !!Update: I have ordered an additional expander. My preference to have the driveway entrance completely covered for ease. It is helpful to have someone help you measure. I goofed by myself. Love them !!!
Recommended Products