Your cart is empty.
Your cart is empty.Product Description
Universal GPU Cooler(Check Size Carefully)
It is universal GPU Cooler,can fit for most of the market graphic cards.
Size: 11 * 4.72*1.18inch.
Please check the size and make sure it can fit your pc perfectly.
Double Ball Bearing
The double ball bearing has a service life of 65,000 hours
Metal Fan Grill
Protect Fan Blades.
Prevent wires or foreign objects touching the blades,
Causing interruption or obstruction.
Two Power Supply Methods
1. Connect to the motherboard power
2. Connect to the computer power supply with D-type interface
Easy to Install
You can easily install it on your computer with the supplied tools, and one screw can complete the fixation.
Power D-type Interface
Four interfaces, three voltages.
Different voltages with different airflow, speed, and noise.
You can select the appropriate voltage interface to start the fan.
5V interface: (1500RPM) Small airflow, very quiet.
7V interface: (2000RPM) Moderate airflow, relatively quiet.
12V interface: (3000RPM) The fan working at full speed, big airflow.
jestjact
2025-08-24 17:22:46
I put this in, and it does a nice job of cooling.
Chris Ondo
2025-06-27 13:32:40
These fans are quiet and move a lot of air.My GPU temp lowered by more than 10 degrees after adding this.I am very happy with my purchase.
nitsua95
2025-06-22 18:45:28
These fans are overall not bad and are probably much better than the other gpu fan coolers on Amazon right now. They are a little noisy but in my case having both an air purifier and an air conditioner running makes me used to the white noise so it doesn't really bother me that much. The GPU temps for my RTX 3090 generally stay under 65°C while overclocking. I do wish it was a little lower considering all the noise it makes to run the fans but I'm still very happy about that.That being said, please do not use the D Type interface adapter that they include with this product. Since I didn't use it, I can't speak from personal experience here, but these adapters are notorious for causing fires and destroying PC's. It is irresponsible of the manufacturers to include this and I hope more people are aware of the dangers that can come along with using them.For me, I plugged my fans directly into my motherboard and I'm using my BIOS settings to control the fan speed. This is a much safer approach than using an adapter that can literally melt. Please take this into consideration when installing these fans in your system. Aside from that, everything else is fine.
Chris Scheiber
2025-05-03 18:19:25
During peak gaming before the secondary cooler, my 3080 FE was running about 72C. After putting the fans next to it, it runs between 61-63C at peak. It's quiet and I've had no issues. Easy and inexpensive way to keep these GPUs cool.
brandan johnson
2025-04-11 17:58:37
I like the amount of air it can move air.I have had a few these and I feel it has been a good price compared to others.The blades sadly break easily and the broken fan would have to be removed to continue using.With the fans connected by one wire removing a broken fan involves cutting its wires.It's unfortunate that each fan cannot be separated individually and used in other ways.
Joshua Andrews
2025-04-07 18:00:24
Running a EVGA 3080 XC3 and this cooler is lowering the temps by minimum 10 degrees Celsius, fantastic cooling. Noise is definitely audible, especially when it ramps up, but most of the time the noise isn't overwhelming.
T
2025-02-18 10:28:07
Tried to use this as a remedy to my 2080 going crazy sometimes with being so taxed its fans go crazy.This only made the situation worse. These fans are significantly noisy. I even tested them in a scenario where my card would be near-overheating running the same stuff and this did actually made the temperatures HIGHER.
Patrick
2025-01-29 21:44:24
Running this fan at 5v under my Vega 64 reference reduced my global and hotspot temps by 5°c at the same GPU fan speed. I was initially skeptical, but an expansion bay fan does appear to supplement blower cards.Not gonna not a star off, but it would be nice if the cable was on the inside edge of the card for more easy wire management.
Recommended Products