Your cart is empty.
Your cart is empty. 4 Inch Mini Table Saw Wood Cutting Machine With 2 Blades
This Mini Benchtop Cutoff Miter Saw is a mini benchtop mounted cut-off saw with high-speed steel blade for cutting metal, wood, plastic and other light materials. Has adjustable miter gauge, perfect for all your DIY projects !
SPECIFICATIONS：
Voltage: 110V, DC motor
Input power: 60W
Max cutting depth: 15mm / 0.6"
Blade diameter: 100mm / 4"
No load speed: 4500 rpm
Power cable length: 1.8m
Machine weight: 3.5kg
Corlor: Yellow
Package Included:
1 x Mini Bench Cut-off Saw
2* Blades
Two Blades: One is with 24 teeth , another is without teeth. All is diameter 100mm/4inch
Instructions & Parts Book
The following points need to be noted:
1. There is a situation that the guide plate is not tightened: firstly, it depends on whether the screw is sliding or the threaded port is not aligned. In this case, the screw can be replaced or the threaded port position can be adjusted (the accessory kit we give is equipped with screws)
2. Customers report that the motor strength is insufficient: the power of this table saw is 60W, which is a mini-power and cannot be compared with a high-power electric saw.
3. Details of the products that can be cut: the depth that can be cut for non-metals is 15MM, the depth that can be cut for soft metals is 13MM, and the depth that can be cut for hard metals is 4MM. If it exceeds this range and product requirements, it cannot be cut by itself.
4. The problem of inaccurate cutting: When the cutting setting is completed, this is a reasonable phenomenon. If the product cutting has an error within 1--2MM, it depends on the material material to be cut.
5. Product size: 19cm(7.5'')*14cm(5.5'')*12cm(4.7'')(L*W*H)
If you have any questions about this product, you can send an email to communicate with us, we will actively help you deal with the problem.
Customer
2025-08-07 14:18:01
This saw is small and it is meant for miniature projects. I have seen reviews saying that someone wanted to use it to make shelves ... nope. Not meant for that use.I make wooden model ships. I wanted it to fabricate deck and hull planks .. perfect for a MODEL SHIP.. Someone else said they wanted to make doll houses. YUP! This saw is slightly bigger than your hand and works great for miniature projects.The saw comes with a carbide blade installed and you get a diamond tipped blade for cutting ceramic material and a third blade made for cutting fibrous material. The carbide blade is SHARP and breezes through the type of material that a modeler would need to cut.There are no safety features beyond a blade cover and an on/off switch, so this is probably not a good choice for a child. I find this to be a good value and it is easy to use. I'm in my 70s, so I long ago figured out not to touch a moving blade.This saw is just what I needed and I can quickly make accurate cuts with it.
H. Unger
2025-07-20 13:03:07
I’m building my first dollhouse and wanted to make a few adjustments to the plan, but I was hesitant to use our full sided saw on such little pieces. This little saw is perfect for the dollhouse pieces (siding, accent pieces, wall boards, etc.) I was nervous to buy it based on the reviews, but I am so happy I took a chance. It cuts very easily. It was incredibly precise. It’s quiet. As long as you don’t rush and take care using it, you won’t have problems with it bogging down. Worth the price. I’d buy it again.
Michael L.
2025-07-12 14:55:23
Used it to cut one of those thin self-adhesive plastic wall tiles. Very handy to work with, much easier to cut material than using hand held knives. However, it stopped running after 2 days! Had to buy another one to finish a small 20 lf kitchen counter backsplash.Very unreliable!
Linda Adams
2025-07-03 17:34:15
Not suitable for larger pieces of wood but perfect for making small projects.
D. Morrison
2025-06-26 17:26:02
Nice little saw , for the price, for cutting small pieces as long as you take it slow. Base appears to be cast iron. No mounting holes in the base to mount it to a work bench. Table is aluminum. It has no rip fence. I made a rip fence from a piece of aluminum angle and a couple of “C†clamps. I used my makeshift fence to rip oak flooring for a doll house from scrap oak flooring. Blade height adjustment is a little hit or miss. Blade to table angle is fixed. The saw table guide has no angle markings and the wing nut on the guide hits anything that you are cutting that is taller than the height of the guide. Replacement wood cutting blades are hard to almost impossible to find for this saw (I’m still looking). It has a 4†diameter blade with a 12mm blade arbor bore hole.
Michael Jolley
2025-06-09 16:43:55
My girl friend loves making small wood parts with this saw..
spike
2025-01-30 21:53:45
I Love this little saw. It works great on little jobs.
Guillermo
2025-01-10 15:21:37
Good item
Recommended Products
