Your cart is empty.
Your cart is empty.Product Description
How to install the actuator ?
- The linear actuators are controlled by applying a 12V DC voltage.
- Blue wire to the positive terminal and brown wire to negative terminal will make it extend. To make it retract, reverse the terminal connections.
- The actuator has pre-installed limit switche inside, it cannot be adjustable.
- It can be stopped at any position, with self-locking function.It will hold its position when the power is off. It will auto stop when it reaches the end.
How to protect the actuator ?
- Please use the 12V DC power battery. If using smaller voltage, the product cannot work well, use bigger voltage maybe will damage to the product.
- The working power should reach 40W,otherwise the linear actuator cannot work normally.
- The actual load does not exceed the rated load.
- Please don't store or operate in high temperature or humid environment, and do not place in corrosive gas, which will reduce motor efficiency.
- The operating frequency of this actuator is 10%. It means that your actuator needs 18 minutes to rest for every 2 minute of work.
What‘s in the box ?
1 x Linear Actuator
2 x Mounting Brackets
EngineerNMe
2025-08-21 21:35:45
It appears to be made well and tested great. I have not applied yet, waiting for warm weather.
Joseph Manuel Perez
2025-05-09 15:16:28
The media could not be loaded.
Rui De Aguiar
2025-03-29 10:09:28
Me sorprendió la rapidez del dezpacho
EH
2025-03-24 14:07:19
Powerful and well-built, though a bit bulky. The hinge parts are quite large, which might not suit all setups. Overall, a good item for DIY projects.
Guy S.
2025-01-06 14:02:31
Had a couple of issues with an actuator but the company stood behind their products and looked after it.
Recommended Products