Your cart is empty.
Your cart is empty.Product Description
- Powrocket 4 Pack Rubber Anti Vibration Pads,Heavy Duty EVA Isolation Mats for Air Conditioner,HVAC System,Compressors,Washer and Dryer
Rubber Anti Vibration Pads
Black and Blue
- Anti vibration pad made of industrail rubber and EVA foam
- Oil and weather resistant,Provides excellent shock absorption and noise reduction
Anti-slip Design
- Stripe design on the shock-absorbing pad provides excellent friction
- ensuring the stability of the equipment when operating in high-vibration environments, avoiding unnecessary slippage.
Four Size：
- 2 x 2 x 7/8 inches
- Hold up to 240 lbs
- 3 x 3 x 7/8 inches
- Hold up to 540 lbs
- 4 x 4 x 7/8 inches
- Hold up to 960 lbs
- 6 x 6 x 7/8 inches
- Hold up to 2160 lbs
LOADING CAPACITY
- Loading capacity 60 PSI, composed of 4 pack of anti-vibration pads. Main designed for outdoor applications, protect the machine and extend the machine lifespan.
WIDELY APPLICATION
- Suitable for central air conditioner,air compressor,ac condenser unit,3D printer,fitness equipment, etc.
Rolidnot
2025-08-14 14:51:48
My newly installed heat pump/minisplit was hung on an exterior wall bracket on my home. When in defrost or over speed mode, the pump was very noisy inside my living room.I used these anti-vibration pads under the bracket arms that rested against the siding.They significantly reduced interior noise from pump vibration.When in defrost mode or over speed mode the heat pump was causing the springs in my double hung window to rattle. That rattle is now gone.I had to trim them down just a bit and used my bandsaw which worked well. These pads are stiff and will bear significant weight.The exterior wall mounted pump bracket is no longer directly resting against my siding and the vibration, while not gone, is significantly reduced.Simple install, friction fit, the proper thickness for my needs and effective. Good purchase that solved a problem that the HVAC installer could not solve.
Anthony P
2025-07-05 11:20:16
Seen these used on much heavier machinery and took a chance, very pleasantly surprised, put 4 of these under both my ankermake m5 and m5c 3d printers and they nearly silenced the motor noise! They made a huge difference in the transfer of the vibration and motor sound!
S. Mayo
2025-06-20 09:22:28
I cut these isolators in half and stacked them to make 3-1/2" tall feet for my generator. Added 4" carriage bolts, nuts and LW, then removed the wheels. It will take 2 strong guys to steal it now. The vibration when running is no more than with the wheels on.
TtC1
2025-05-25 15:21:41
My printer shakes a lot, this controls it.
JOhhny
2025-05-02 15:01:33
This product probably wasn't made for that but It didn't really make a difference in my setup honestly.
Pamela
2025-03-19 17:30:47
No Viberation on floor from My Subwoofer
AC
2025-01-29 18:36:46
The sound of my basement dehumidifier has always annoyed me. I looked into a new one and they don't seem to be much better. I figured I would try these pads. I can not believe the difference they make. They seem to take out all that vibration and annoying compressor noise. Well worth the gable. Very happy I bought them.
Keith J. Leslie
2025-01-06 20:01:15
I have two high speed 3D printers on the same table. I thought the table was strong enough to handle it, but they really do create a LOT of vibration. These pads cut it down probably more than half. They come in different sizes. I got the smaller ones. When I buy these again, I will be getting the larger ones.
Recommended Products