Your cart is empty.
Your cart is empty.Product Description
As we all know, carbon fiber has some very unique and valuable qualities. If used the right way, carbon fiber can reduce the weight and thickness of components. At the same time, it boosts stability and structural strength.
FANCYWING carcon fiber rods contains 100% carbon fiber imported from Japan. The surface is matte finish without any glass fiber contents. High stiffness, high tensile strength, low weight, high chemical resistance, high temperature tolerance and low thermal expansion are also prove of FANCYWING carbon fiber rods. In the past few years, our carbon fiber products have been trusted and supported by many customers.
Product Description:
Item Name: Full Carbon Fiber Rods
Dimension: 200MM 300MM 400MM 500MM
Features: Strength and Light Weight
Package Includes: 5 PCS Carbon Fiber Rods/ 10 PCS Carbon Fiber Rods
Notice: Please check the thickness and size details carefully before you purchase.
High Quality Carbon Fibers Material
The carbon fiber material we use is resin impregnated woven cloth that is commonly referred to as “pre-preg.” It is made with high quality carbon fibers combined with space industry defined resin systems.
Beautiful and Quality Rods
We use heated compression molding to cure the pre-preg material into round rods.
- High strength and stiffness with low weight
- Excellent fatigue resistance
- Dimensional stability: Low to Zero CTE (Coefficient of Thermal Expansion)
Widely Application
Fancywing offers a wide range of carbon fiber rods for many different applications.
Carbon fiber tubes are used in numerous applications like tactical ladders, trusses, beams, and more.
FANCYWING stock various sizes, looks, and thicknesses as shown below. We also offer custom sizes.
Rods Sizes
200MM X 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 6.0MM 7.0MM 8.0MM 9.0MM 10.0MM
300MM X 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 6.0MM 7.0MM 8.0MM 9.0MM 10.0MM
400MM X 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 6.0MM 7.0MM 8.0MM 9.0MM 10.0MM
500MM X 1.0MM 1.5MM 2.0MM 2.5MM 3.0MM 4.0MM 5.0MM 6.0MM 7.0MM 8.0MM 9.0MM 10.0MM
ShelteredChild
2025-08-15 13:26:29
Exactly as expected, easy enough to cut with a hacksaw or rod cutter.
Dave Itterly
2025-07-30 18:57:05
A pellet was stuck in my air pistol. I just pushed it right out. I did not want to use a metal rod as that could scratch barrel
Customer
2025-07-29 17:16:36
There rods are very strong and rigid. Used in RC aircraft construction.
Harebare
2025-07-20 17:45:32
I bought these carbon fiber rods just for making Glock pistol trigger housing pins. Just cut off at the needed length. They are stout rods.
Computer Guy
2025-07-05 10:54:43
I had a couple of fishing poles that had broken tips. One was a carbon fiber pole and one was a fiberglass pole. One had been stepped on in a boat and had about six inches of its top broken off. The other had actually been caught in a door and was broken. Using these carbon fiber rods, after measuring the inside diameter of the broken rods, I was able to repair both of them. I cut the ragged ends off cleanly and then sanded the edges. I mixed up some JB Weld on a guess and then coated these pieces and slid them into my broken fishing poles and joined the two pieces together. I really didn't know if the JB Weld would do the trick. I had to make sure that everything stayed lined up and also had to clean off the excess Weld.After a couple of hours, to my delight, the rods were solidly joined together. They can be used again. And I have flexed them and bent them over like they were heavily loaded and the repairs are holding well. Where the inserts are, they are a little bit stiffer. But that is better than losing the length of the rod and losing the factory end of the rod.Both of my rods measured so closely to the same size that I was able to use the same size carbon fiber insert on each. If you have different size fishing rods, you may have to order different carbon fiber sizes to fit.
Kirby Bowman
2025-06-28 11:35:26
A basic material, used in model airplanes. Strong enough.
Greyeyes
2025-06-24 19:23:51
Use this to make new shafts for the aquarium filter impeller. Originals (ceramic) seem to break over time, and this saved me a ton of cash not having to buy the entire impeller assembly.
Will Parker
2025-06-19 10:00:27
This is great carbon fiber rod!
ShelteredChild
2025-06-14 11:54:19
Exactly as expected, easy enough to cut with a hacksaw or rod cutter.
Dave Itterly
2025-05-28 17:49:09
A pellet was stuck in my air pistol. I just pushed it right out. I did not want to use a metal rod as that could scratch barrel
Customer
2025-04-23 12:21:27
There rods are very strong and rigid. Used in RC aircraft construction.
Harebare
2025-03-17 11:01:42
I bought these carbon fiber rods just for making Glock pistol trigger housing pins. Just cut off at the needed length. They are stout rods.
Computer Guy
2025-03-14 15:13:12
I had a couple of fishing poles that had broken tips. One was a carbon fiber pole and one was a fiberglass pole. One had been stepped on in a boat and had about six inches of its top broken off. The other had actually been caught in a door and was broken. Using these carbon fiber rods, after measuring the inside diameter of the broken rods, I was able to repair both of them. I cut the ragged ends off cleanly and then sanded the edges. I mixed up some JB Weld on a guess and then coated these pieces and slid them into my broken fishing poles and joined the two pieces together. I really didn't know if the JB Weld would do the trick. I had to make sure that everything stayed lined up and also had to clean off the excess Weld.After a couple of hours, to my delight, the rods were solidly joined together. They can be used again. And I have flexed them and bent them over like they were heavily loaded and the repairs are holding well. Where the inserts are, they are a little bit stiffer. But that is better than losing the length of the rod and losing the factory end of the rod.Both of my rods measured so closely to the same size that I was able to use the same size carbon fiber insert on each. If you have different size fishing rods, you may have to order different carbon fiber sizes to fit.
Kirby Bowman
2025-03-11 14:03:57
A basic material, used in model airplanes. Strong enough.
Greyeyes
2025-01-02 16:59:32
Use this to make new shafts for the aquarium filter impeller. Originals (ceramic) seem to break over time, and this saved me a ton of cash not having to buy the entire impeller assembly.
Will Parker
2024-12-16 19:13:30
This is great carbon fiber rod!
Recommended Products