Your cart is empty.
Your cart is empty.Product Description
Brittany
2025-09-05 18:42:39
The hoses started leaking after 5 weeks, the 90 fittings are not proper to clear the shift linkage right, lines are 7 or 8 inches to long, cheap plastic braided… won’t use them wish I could get money back on this junk not worth the price by no means
austin
2025-07-14 21:45:43
This product is absolute junk! All 3 ines are too long and very poor quality. These hoses are thin plastic lines wrapped in stainless then the black outer braiding. Absolutely no flexibility without kinking occurring to the hoses. The 90 degree fittings were not indexed properly when crimped. The adapters to go into the transmission were not the 1/4npt that was advertised. I used a thread die and made them correct. The 1/4 to -8 adapters were the only things from this kit I retained. Made my own lines with 1/2 trans hose and reusable hydraulic fittings for cheaper and much better quality.
jordon a.
2025-07-08 13:03:27
Garbage, lines were were too long and hit the firewall and frame causing them to bend improperly, the 90 fitting thay goes behind the shift linkage is stopping my shift linkage from moving, stuck in my driveway until I can figure out what to do with it. Don't recommend this product. No direction on how to install. Will request a refund and intend on purchasing a name brand kit. Drive shaft shredded my line and now in thr same position I was before buying the lines. Do not buy this product!!!!
Jeff Prisk
2025-07-03 14:07:25
Same as everyone else. Wrong fittings came with hoses. Hoses were way to long. Issues with shift linkage after installing. Save your money and invest in a better set....
Jack
2025-06-26 14:02:03
Receive my lines and upon inspection of the package I realized half the hardware is incorrect. Needless to say it cost my truck to be down longer than it needs to be. Waiting on the replacement, hopefully it comes correct this time around.
brianr
2025-06-23 21:11:22
The hose material is junk. The ends are not indexed properly, hoses are too long, and not very flexible. The front cooler line on the transmission hits the shift linkage. The straight fittings on the hoses to the heat exchanger put too much stress on the heat exchanger. It will destroy the heat exchanger in no time. Tossing these on the trash pile and buying the Full Send Diesel lines instead. I should have never wasted my money on this kit.
Justin Maktaveesub
2025-05-18 15:41:09
Do not purchase, can only use 1 line out of the kit, they do not come with correct adapters to adapt the factory trans cooler lines.Factory trans cooler lines use quick connects, the ones included are barb fittings.Lines are also too long, and make the fittings do not rotate. Extremely hard to install something so easy.
Kevin travis
2025-04-14 11:29:06
This kit wS suppose to come with -8jic to ¼npt fittings. It came with -8jic to face seal oring fittings. Useless for the 48re transmission. I help on to this upgrade till I needed it and now that my lines blew and need it I can't even install it. I now have a useless truck that I have to use a different car to go and find the correct fittings. And get other fittings because lines are way to long for the short lines.
Nate
2025-03-11 15:13:02
None of the lines were correct size , fittings were all wrong and quality of lines were garbage , kinked and won’t bend the right way. DO NOT BUY THIS !!!!!
Didn't fit
2025-02-21 19:59:03
Didn't fit . Still sourcing individual fittings to connect them
Reider68
2025-01-16 18:25:44
Poor quality,way too long,cheap inflexible garbage…DO NOT BUY THESE
Recommended Products
$28.99
$ 14 .99 $14.99