Shopping Cart

Your cart is empty.

Your cart is empty.

496 Fuel Tank Filter Assembly with Wrench Replacement for Gasoline and Diesel Water Separate 30 Micron Max 25 Gpm 150 Psi with 1” NPT Top Cap Replace# B10-AL

Free shipping on orders over $29.99

$25.99

$ 11 .99 $11.99

In Stock

About this item

  • [COMPATIBLE WITH FUEL TYPE] Fits common fuels such as unleaded gas, diesel, fuel oil, up to 20% biodiesel and related additives.
  • [FUEL FILTER ELEMENT] Keeping a clean 496-5 filter in your vehicle can reduce damage done to your engine and other fuel delivery components. 30 microns, provide high flow rates and superior filtration efficiency, protect fuels from particles such as rust, sand, dirt and water. With protective sheet to prevent the filter element from being destroyed or deformed by pressure.
  • [TOP CAP] With 1" NPT pipe fittings inlet and outlet marked at the top of the cap.
  • [HYALINE BOWL] Use 495-4 fuel tank filter bowl, makes it easy to visual monitor the fuel flow, the fuel flow will slow down when you need to replace the element. Drain valve installed at the bottom to drain water.
  • [FEATURE] Additional matching wrench and tape for easy installation and replacement. Flow rate max 25 gpm. Working pressure up to 150 psi. Gravity flow rate is approximately 5 gpm.



Product Description

Z675-1

Suitable Fuel Type

This 496 Fuel Tank Filter is Designed for Use with Gasoline, Diesel or 20% Biodiesel (B20) Fuels

Z675-2

Installation

  1. Attach filter top cap to storage tank valve on opening marked “IN”
  2. Attach hose and nozzle to filter opening marked “OUT”
  3. When installing the element and bowl, apply a coating of oil to each side of gasket
  4. These components should be hand tightened only. Over tightening of the filter bowl will result in difficulty in removal at a later date
  5. When assembly is complete, check for leaks
Z675-3

Package Include

  • 1x Fuel Tank Filter Assembly
  • 1x Wrench
  • 1x Teflon Tape

Feature

Fuel Filter Element 30 Microns with Protective Sheet
Height 9.5”
Inlet/Outlet Size 1” NPT
Flow Rate Max 25 Gpm
Working Pressure Up to 150 Psi
Gravity Flow Rate Approximately 5 Gpm

Bill Briggs
2025-09-04 17:30:35
Works perfect . Priced right
Seeadler
2025-08-26 17:18:23
I bought this to build a fuel polish unit. Well built filter
AJames
2025-08-25 11:08:14
Was purchased for home diesel tank work good at flowing out thing’s I don’t want in my fuel
Deerfield Brent
2025-07-06 12:49:59
Installed easily. The die cast top looks well made with clean well cut threads. Plastic bowl and threads perfect and unscrewed easily by hand contrary to many negative comments. Has an o ring seal. The brass screw drain works smoothly again contrary to some reviews. The included wrench seems to be plastic and very flimsy. Doubt it will survive changing a stuck filter. Will rate 4 stars now and update later if it passes leak checks after a reasonable time. LATER: Brass drain valve developed drip leak than increased to a stream after pumping less than 12 gallons. Terrible mess and dangerous. Do not buy this product.
william Brent housam
2025-06-01 18:51:56
Works just as it should
M. Ellen C.
2025-04-17 16:40:34
I have an external fuel oil tank that is many years old and was giving my furnace some trouble with water and sediment. I McGyvered a pump, pre-filter and used this filter as a second stage to take in the bad and output the good back into the tank. I was fully expecting to see water at the bottom of the plastic cup so I could drain it off. To my surprise, I never saw a collection of water. Maybe the pump was too fast. IDK. However, when I retested the tank the water was mostly gone. So it worked, sort of, because of the filter itself, not from seeing the satisfaction of how much water was in my fuel tank. 4 stars for the fact my filter contraption did what I wanted. 5 stars if I could tell it actually separated the water and how much.
James
2025-04-10 11:46:33
I have this installed on an external diesel tank that I use for my business, and it does a really good job of removing the sediment and condensation from the fuel. I have purchased the replacement filters and have been using it problem free for several months now.
Exelente tal como está en la foto
2025-04-02 16:06:12
Deberia venir mejor envuelto
Francois Caron
2025-03-17 18:36:03
Bon filtre pour le diesel
Erny voth f
2025-02-01 16:46:23
Muchas gracias
Juan Carlos Valencia
2025-01-17 15:17:30
Excelente producto
Farron Whitworth
2024-12-07 13:02:37
The bleeder valve was stripped when I received it.